Interrupteur de fin de course FAW J6P: Déconstruction 6 Pièces critiques pour un contrôle de porte impeccable

Bienvenue dans cette déconstruction critique du Interrupteur de fin de course FAW J6P système, a vital safety assembly for the FAW Jiefang CA3250P66K2L1T1E 6×4 tombereau. Ce guide détaille les 6 types de composants clés, focusing on the heavy-duty limiter assembly that is essential for operational safety.

Le Interrupteur de fin de course FAW J6P, également connu sous le nom de “door limiter” ou “door check,” is a heavy-duty mechanical component, not an electrical switch. It is engineered to perform a critical safety function: to stop the massive door from over-swinging in high winds, preventing catastrophic damage to the hinges and cab body. This analysis will deconstruct the limiter itself, its partner component (the locating pin), the trim panel that covers it, and all specialized fasteners.

Cœur 1: The ‘Damage Prevention’ Logique (The Limiter Assembly)

This component is the namesake of the Interrupteur de fin de course FAW J6P système. It is a robust, purely mechanical assembly that performs a critical safety and damage-prevention role for the door.

1. Composant: ‘Front door limiter assembly’ (6106035-A01) – Quantité 2
Ce (Comp 4) est le poids lourd “door check” ou “door stop.” It consists of a thick, high-strength steel strap that mounts to the cab’s A-pillar (the forward frame) and slides into a check-link mechanism that is bolted inside the door itself.

The Over-Extension Logic is its primary function. A J6P’s door is large and heavy. If a driver opens it on a windy day, the door can act as a “naviguer,” be caught by a gust, and be thrown open with violent force. Ce Interrupteur de fin de course FAW J6P is the brake that prevents this.

It is engineered to stop the door’s travel at a pre-set maximum angle. This single function prevents the door from swinging 180 degrees and smashing into the truck’s fender, which would bend the hinges, buckle the door skin, and destroy the mirror assembly.

The Detent Logic is its secondary function. The check mechanism that mounts inside the door contains high-tension springs and rollers. These rollers engage with “detents” or notches in the steel strap. C'est ce qui crée le “en deux étapes” feel when opening the door, lui permettant de “rest” in a halfway-open position without swinging shut.

Failure of the Interrupteur de fin de course FAW J6P is common after years of service. The internal rollers or springs will wear out or break, resulting in a ‘popping’ or ‘banging’ sound when the door opens, or a door that will not stay open on an incline.

Cœur 2: The ‘Precision Alignment’ Logique (The Locating Pin)

This component is a critical partner to the Interrupteur de fin de course FAW J6P and latching system. It is a small but vital part that ensures the door closes perfectly every time, for the life of the vehicle.

1. Composant: ‘Left/Right front door locating pin assembly’ (6101535-A01 / 6101540-A01) – Quantité 1 chaque
Ce (Comp 3) is a precision-machined, hardened steel pin with a tapered head. It is supplied in mirrored left and right versions and is typically mounted on the lower, rear edge of the door. It engages with a corresponding socket on the cab’s B-pillar.

The Anti-Sag Logic is its entire purpose. A heavy-duty truck door, hanging on two hinges, is under constant gravitational stress. Over years of use, the hinges will wear, and the door will naturally “sag” by a few millimeters.

This sag causes the door’s latch (Système 143) to become misaligned with the striker on the cab, making the door difficult to close. A driver would have to lift the door handle while slamming it shut.

This locating pin solves the problem. Alors que la porte se ferme, the tapered pin enters the socket *before* the latch. This action physically lifts the sagging door by the required amount, guiding it into perfect vertical alignment. This ensures the latch mechanism engages smoothly and effortlessly every time, reducing wear on the lock.

Cœur 3: The ‘Associated Shield’ Logique (The Lower Trim Panel)

This component is the large, visible panel that covers the Interrupteur de fin de course FAW J6P mécanisme, providing an acoustic barrier and a durable “kick plate” for the interior.

1. Composant: ‘Left/Right front door lower trim panel assembly’ (6101515Da01 / 6101520Da01) – Quantité 1 chaque
Ce (Comp 2) is the main interior panel for the lower half of the door. It is a multi-layer assembly, typically a rigid ABS plastic core wrapped in a durable, textured vinyl skin.

The Protection Logic is vital. On a dump truck, the driver’s boots are constantly exposed to mud, gravier, et de la neige. This panel is designed to be a sacrificial “kick plate.” It endures scuffs and impacts, protecting the painted inner door shell from damage and corrosion.

The Acoustic Logic is also critical. Ce grand, rigid panel, often backed with sound-deadening felt, provides a primary barrier against road and tire noise. A loose or damaged panel will significantly increase cab noise.

This trim panel is the service access cover. To access and replace the Interrupteur de fin de course FAW J6P (Comp 4) or the locating pin (Comp 3), a technician must first remove this lower trim panel.

Interrupteur de fin de course FAW J6P: Répartition complète en 6 parties

Le tableau suivant fournit l'intégralité, ventilation détaillée de tous 6 types de composants dans le Interrupteur de fin de course FAW J6P and lower trim assembly (Système 152) Pour le FAW Jiefang CA3250P66K2L1T1E 6×4 tombereau.

Spécifications de base

Les spécifications pour le Interrupteur de fin de course FAW J6P system are defined by its multiple roles in damage prevention, cab alignment, and interior protection.