FAW J6P Front Wing: Deconstructing 15 Critical Parts for Flawless Debris Containment

This is a comprehensive guide to the FAW J6P Front Wing (Upper Fender and Footstep) assembly for the FAW Jiefang CA3250P66K2L1T1E 6×4 dump truck. This deconstruction analyzes the 15 serviceable component types that form this assembly, detailing the main panels, structural brackets, and safety steps.

The FAW J6P Front Wing assembly performs a critical dual function: providing robust debris containment over the front wheels and integrating the essential access steps for the driver. It is positioned high on the cab structure, directly above the front wheels, protecting the windshield and upper bodywork from mud and stones thrown up by the tires. The design uses high-strength steel brackets to support composite or plastic panels, balancing durability with necessary flexibility.

This deconstruction will analyze the key structural supports, the main fender panels (wings), the integrated footrests (steps), and the specialized hardware used for security and ease of removal. Maintaining the integrity of the FAW J6P Front Wing is essential for visibility, safety, and cab protection. Every component listed for the FAW J6P Front Wing is critical for ensuring the assembly remains rigid and secure under the severe conditions encountered by a heavy-duty truck.

Core 1: The “Panel & Step” Logic (The Outer Structure)

This group represents the visible exterior parts of the FAW J6P Front Wing, including the protective fender panels and the integrated safety access steps.

1. Component: ‘Left upper wing panel’ (5103121AB35) & ‘Right upper wing panel’ (5103122AB35) – Qty 1 each
This (Comp 1, 2) is the main protective fender panel. The Debris Containment Logic requires this component to be wide and high to fully shield the cab from the front wheels. They are typically made of durable, slightly flexible materials to absorb minor impacts.

2. Component: ‘Left third-level footrest’ (5103191BA01) & ‘Right third-level footrest’ (5103192BA01) – Qty 1 each
This (Comp 3, 4) is the integrated step surface. The Access Logic is critical: these heavy-duty platforms provide the driver with a safe, high step for cleaning the windshield and accessing the engine bay when the cab is tilted. These steps are structurally integrated into the FAW J6P Front Wing.

3. Component: ‘Left/Right upper mudguard’ (5103161-B35, 5103162-B35) – Qty 1 each
This (Comp 8, 9) refers to the lower or rear section of the fender panels, confirming the **FAW J6P Front Wing** is composed of multiple protective sections to ensure maximum coverage over the wheels.

Core 2: The “Structural Support” Logic (Brackets and Rods)

This group of components provides the necessary internal rigidity to the FAW J6P Front Wing, ensuring the panels and steps do not flex or fail under load.

1. Component: ‘Left rear mudguard support bracket assy’ (5103145-B35) & ‘Right rear support bracket assy’ (5103150-B35) – Qty 1 each
This (Comp 10, 11) is the complex support framework that secures the rear sections of the FAW J6P Front Wing to the cab structure. These brackets are heavy-duty and must be strong enough to withstand direct side impacts.

2. Component: ‘Front mudguard front support bracket assy’ (5103140-A01) – Qty 2
This (Comp 12) is the front structural brace. These two brackets anchor the front edge of the FAW J6P Front Wing panels, providing essential stiffness where the wind resistance is highest.

The Rigidity Logic dictates that without this internal steel framework, the plastic fender panels would vibrate severely at highway speeds, quickly leading to fatigue cracks and detachment. The integrity of the entire **FAW J6P Front Wing** assembly hinges on the secure installation of these structural supports.

Core 3: The “Fastening” Logic (The Hardware System)

This group includes the high-strength fasteners and washers necessary to maintain the integrity of the FAW J6P Front Wing structure against constant vehicle vibration and road shock.

1. Component: ‘Combination bolt’ (CQ1420625F6, CQ1460616, CQ1420620) – Qty 20, 12, and 12
This (Comp 5, 13, 15) is the primary mounting hardware. The Combination Bolt Logic, where the washer is permanently attached, ensures that the washer is never omitted during reassembly, maintaining proper clamping force distribution on the FAW J6P Front Wing panels. The high total quantity of bolts underscores the importance of securing every part of the assembly.

2. Component: ‘Cross recessed pan head screw assy’ (Q2360612F6) – Qty 8
This (Comp 7) is a self-tapping or fine-threaded screw used for securing the flexible panel sections of the FAW J6P Front Wing to the inner support structure. This hardware requires lower torque than the main structural bolts.

3. Component: ‘Large washer’ (Q40206F6, Q40206) – Qty 20 and 24
This (Comp 6, 14) is a plain, large-diameter washer. The Load Distribution Logic ensures that the clamping force of the fasteners is spread evenly across the surface of the often-composite **FAW J6P Front Wing** panels, preventing the bolt heads from cracking or damaging the material. This is crucial for the longevity of the entire FAW J6P Front Wing.

FAW J6P Front Wing: Complete 15-Part Breakdown

The following table provides the complete, detailed breakdown of all 15 component types in the FAW J6P Front Wing assembly for the FAW Jiefang CA3250P66K2L1T1E 6×4 dump truck. This list is essential for ordering spare parts and performing a complete service of the FAW J6P Front Wing.

Core Specifications

The specifications for the FAW J6P Front Wing are defined by its function as a critical containment and access structure, utilizing heavy-duty internal brackets and high-security fasteners for cab protection.