Крыло переднее FAW J6P: Деконструкция 15 Важные детали для безупречного сдерживания мусора

This is a comprehensive guide to the Крыло переднее FAW J6P (Upper Fender and Footstep) сборка для FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. Эта деконструкция анализирует 15 serviceable component types that form this assembly, detailing the main panels, structural brackets, and safety steps.

The Крыло переднее FAW J6P assembly performs a critical dual function: providing robust debris containment over the front wheels and integrating the essential access steps for the driver. It is positioned high on the cab structure, directly above the front wheels, protecting the windshield and upper bodywork from mud and stones thrown up by the tires. The design uses high-strength steel brackets to support composite or plastic panels, balancing durability with necessary flexibility.

This deconstruction will analyze the key structural supports, the main fender panels (wings), the integrated footrests (шаги), and the specialized hardware used for security and ease of removal. Сохранение целостности Крыло переднее FAW J6P is essential for visibility, безопасность, and cab protection. Every component listed for the Крыло переднее FAW J6P is critical for ensuring the assembly remains rigid and secure under the severe conditions encountered by a heavy-duty truck.

Основной 1: The “Панель & Шаг” Логика (The Outer Structure)

This group represents the visible exterior parts of the Крыло переднее FAW J6P, including the protective fender panels and the integrated safety access steps.

1. Компонент: ‘Left upper wing panel’ (5103121АБ35) & ‘Right upper wing panel’ (5103122АБ35) – Кол-во 1 каждый
Этот (Комп 1, 2) is the main protective fender panel. The Debris Containment Logic requires this component to be wide and high to fully shield the cab from the front wheels. They are typically made of durable, slightly flexible materials to absorb minor impacts.

2. Компонент: ‘Left third-level footrest’ (5103191BA01) & ‘Right third-level footrest’ (5103192BA01) – Кол-во 1 каждый
Этот (Комп 3, 4) is the integrated step surface. The Access Logic имеет решающее значение: these heavy-duty platforms provide the driver with a safe, high step for cleaning the windshield and accessing the engine bay when the cab is tilted. These steps are structurally integrated into the Крыло переднее FAW J6P.

3. Компонент: ‘Left/Right upper mudguard’ (5103161-Б35, 5103162-Б35) – Кол-во 1 каждый
Этот (Комп 8, 9) refers to the lower or rear section of the fender panels, confirming the **FAW J6P Front Wing** is composed of multiple protective sections to ensure maximum coverage over the wheels.

Основной 2: The “Структурная поддержка” Логика (Brackets and Rods)

This group of components provides the necessary internal rigidity to the Крыло переднее FAW J6P, ensuring the panels and steps do not flex or fail under load.

1. Компонент: ‘Left rear mudguard support bracket assy’ (5103145-Б35) & ‘Right rear support bracket assy’ (5103150-Б35) – Кол-во 1 каждый
Этот (Комп 10, 11) is the complex support framework that secures the rear sections of the Крыло переднее FAW J6P к конструкции кабины. These brackets are heavy-duty and must be strong enough to withstand direct side impacts.

2. Компонент: ‘Front mudguard front support bracket assy’ (5103140-А01) – Кол-во 2
Этот (Комп 12) is the front structural brace. These two brackets anchor the front edge of the Крыло переднее FAW J6P panels, providing essential stiffness where the wind resistance is highest.

The Логика жесткости dictates that without this internal steel framework, the plastic fender panels would vibrate severely at highway speeds, quickly leading to fatigue cracks and detachment. The integrity of the entire **FAW J6P Front Wing** assembly hinges on the secure installation of these structural supports.

Основной 3: The “Крепление” Логика (The Hardware System)

This group includes the high-strength fasteners and washers necessary to maintain the integrity of the Крыло переднее FAW J6P structure against constant vehicle vibration and road shock.

1. Компонент: «Комбинированный болт’ (CQ1420625F6, CQ1460616, CQ1420620) – Кол-во 20, 12, и 12
Этот (Комп 5, 13, 15) is the primary mounting hardware. The Комбинированная логика болтов, where the washer is permanently attached, ensures that the washer is never omitted during reassembly, maintaining proper clamping force distribution on the Крыло переднее FAW J6P panels. The high total quantity of bolts underscores the importance of securing every part of the assembly.

2. Компонент: 'Винт с потайной головкой и крестообразным шлицем в сборе’ (Q2360612F6) – Кол-во 8
Этот (Комп 7) is a self-tapping or fine-threaded screw used for securing the flexible panel sections of the Крыло переднее FAW J6P to the inner support structure. This hardware requires lower torque than the main structural bolts.

3. Компонент: «Большая стиральная машина’ (Q40206F6, Q40206) – Кол-во 20 и 24
Этот (Комп 6, 14) is a plain, large-diameter washer. The Load Distribution Logic ensures that the clamping force of the fasteners is spread evenly across the surface of the often-composite **FAW J6P Front Wing** panels, preventing the bolt heads from cracking or damaging the material. This is crucial for the longevity of the entire Крыло переднее FAW J6P.

Крыло переднее FAW J6P: Полная разбивка на 15 частей

В следующей таблице представлена ​​полная, подробная разбивка всех 15 типы компонентов в Крыло переднее FAW J6P сборка для FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. Этот список необходим для заказа запасных частей и выполнения полного обслуживания автомобиля. Крыло переднее FAW J6P.

Основные характеристики

Технические характеристики Крыло переднее FAW J6P are defined by its function as a critical containment and access structure, utilizing heavy-duty internal brackets and high-security fasteners for cab protection.