FAW J6P Fire Extinguisher Bracket: Deconstructing 8 Critical Parts for Emergency Safety

This is a comprehensive technical guide to the FAW J6P Fire Extinguisher Bracket assembly for the FAW Jiefang CA3250P66K2L1T1E 6×4 dump truck. This deconstruction analyzes the 8 critical component types, detailing the mounting hardware, protective pads, and retaining straps that secure this life-saving device inside the cab.

The FAW J6P Fire Extinguisher Bracket is a mandatory safety device. Its function is two-fold: first, to ensure the heavy fire extinguisher remains securely mounted and readily accessible to the driver, and second, to prevent the metal extinguisher from vibrating excessively against the cab structure, which would cause noise and metal fatigue. The BOM reveals a system of specialized fasteners, retaining straps, and isolating pads designed for maximum security in a high-vibration environment.

This deconstruction will analyze the key components of the FAW J6P Fire Extinguisher Bracket, focusing on the retention mechanism (straps and side brackets), the vibration dampening pads (front and rear), and the specialized locking hardware. A properly secured FAW J6P Fire Extinguisher Bracket ensures that the extinguisher remains effective and does not become a dangerous projectile inside the cab during a crash or sudden stop. Every part of the FAW J6P Fire Extinguisher Bracket assembly is critical to operational safety.

Core 1: The “Retention” Logic (Strap and Brackets)

This core group of components ensures that the fire extinguisher remains fixed to the cab structure, regardless of vehicle motion. This is the main purpose of the FAW J6P Fire Extinguisher Bracket.

1. Component: ‘Fire extinguisher bracket and strap assy’ (5101195-A01) – Qty 1
This (Comp 1) is the complete primary bracket system, which includes the retaining strap. The Retention Logic requires the strap to be easily releasable (for emergency access) but secure enough to withstand severe g-forces during a collision or abrupt stop. This entire assembly is the anchor for the FAW J6P Fire Extinguisher Bracket.

2. Component: ‘Fire extinguisher side bracket’ (5101197-A01) – Qty 2
This (Comp 2) is a supplementary bracket that adds lateral support. Two of these are used to prevent the cylindrical extinguisher body from rolling or twisting within the main bracket (Comp 1). This ensures that the handle and activation pin of the extinguisher are always facing the operator, maximizing access time during an emergency. The complete FAW J6P Fire Extinguisher Bracket system relies on this dual-bracket support.

Core 2: The “Damping” Logic (The Protective Pads)

This core group addresses the lifespan of the cab structure itself, ensuring the metal extinguisher body does not cause damage due to constant vibration.

1. Component: ‘Fire extinguisher bracket front pad’ (5101241-A01) – Qty 1
This (Comp 5) is the protective padding used at the primary contact point between the metal bracket and the cab. The Vibration Isolation Logic dictates that this pad, likely a high-density rubber component, absorbs and dampens the relentless high-frequency vibrations transmitted through the FAW J6P Fire Extinguisher Bracket assembly.

2. Component: ‘Fire extinguisher bracket rear pad’ (5101242-A01) – Qty 5
This (Comp 8) is the padding used at the rear mounting points. The FAW J6P Fire Extinguisher Bracket uses five of these rear pads to fully isolate the entire rear surface of the assembly from the cab panel. Without these pads, the constant chafing would quickly damage the cab’s paint and potentially lead to metal fatigue in the cab structure itself, compromising the integrity of the FAW J6P Fire Extinguisher Bracket installation.

Core 3: The “Mounting” Logic (Fasteners and Security)

This final group includes the specialized, high-strength locking hardware essential for maintaining the safety and integrity of the FAW J6P Fire Extinguisher Bracket against vehicle motion.

1. Component: ‘Hex flange lock nut’ (CQ32608) – Qty 1
This (Comp 7) is the primary locking hardware. The Locking Logic is paramount: this flange nut contains a mechanical feature (a locking thread or insert) that prevents it from backing off the bolt under vibration. This specific nut is used to secure the main structure of the FAW J6P Fire Extinguisher Bracket to the cab.

2. Component: ‘Hex flange bolt’ (Q1840835, Q1840825) – Qty 1 each
These (Comp 3, 4) are the high-tensile bolts used to anchor the main bracket. They are characterized by a flange under the head, which distributes the clamping force over a wider area, preventing the bolt from sinking into the soft cab panel.

3. Component: ‘Cross recessed pan head screw’ (Q2140820) – Qty 1
This (Comp 6) is a low-torque fastener, likely used to attach the ‘Side bracket’ (Comp 2) to the main bracket (Comp 1) or to secure the final trim piece. The FAW J6P Fire Extinguisher Bracket uses different fasteners depending on the load requirement.

FAW J6P Fire Extinguisher Bracket: Complete 8-Part Breakdown

The following table provides the complete, detailed breakdown of all 8 component types in the FAW J6P Fire Extinguisher Bracket assembly for the FAW Jiefang CA3250P66K2L1T1E 6×4 dump truck. This list is essential for any service of the FAW J6P Fire Extinguisher Bracket.

Core Specifications

The specifications for the FAW J6P Fire Extinguisher Bracket are defined by its specialized retention and damping requirements, ensuring the extinguisher is both safe and accessible within the truck cab.