- Ciudad de ChangChun, Provincia de Jilin, Porcelana
por 
Esta es una guía técnica completa para el Soporte para extintor FAW J6P Montaje para FAW Jiefang CA3250P66K2L1T1E 6×4 camión volcado. Esta deconstrucción analiza la 8 tipos de componentes críticos, detailing the mounting hardware, almohadillas protectoras, and retaining straps that secure this life-saving device inside the cab.
El Soporte para extintor FAW J6P is a mandatory safety device. Its function is two-fold: primero, to ensure the heavy fire extinguisher remains securely mounted and readily accessible to the driver, y segundo, to prevent the metal extinguisher from vibrating excessively against the cab structure, which would cause noise and metal fatigue. The BOM reveals a system of specialized fasteners, retaining straps, and isolating pads designed for maximum security in a high-vibration environment.
This deconstruction will analyze the key components of the Soporte para extintor FAW J6P, focusing on the retention mechanism (straps and side brackets), the vibration dampening pads (front and rear), and the specialized locking hardware. A properly secured Soporte para extintor FAW J6P ensures that the extinguisher remains effective and does not become a dangerous projectile inside the cab during a crash or sudden stop. Every part of the Soporte para extintor FAW J6P assembly is critical to operational safety.
This core group of components ensures that the fire extinguisher remains fixed to the cab structure, regardless of vehicle motion. This is the main purpose of the Soporte para extintor FAW J6P.
1. Componente: ‘Fire extinguisher bracket and strap assy’ (5101195-A01) – Cantidad 1
Este (compensación 1) is the complete primary bracket system, which includes the retaining strap. El Lógica de retención requires the strap to be easily releasable (for emergency access) but secure enough to withstand severe g-forces during a collision or abrupt stop. This entire assembly is the anchor for the Soporte para extintor FAW J6P.
2. Componente: ‘Fire extinguisher side bracket’ (5101197-A01) – Cantidad 2
Este (compensación 2) is a supplementary bracket that adds lateral support. Two of these are used to prevent the cylindrical extinguisher body from rolling or twisting within the main bracket (compensación 1). This ensures that the handle and activation pin of the extinguisher are always facing the operator, maximizing access time during an emergency. The complete Soporte para extintor FAW J6P system relies on this dual-bracket support.
This core group addresses the lifespan of the cab structure itself, ensuring the metal extinguisher body does not cause damage due to constant vibration.
1. Componente: ‘Fire extinguisher bracket front pad’ (5101241-A01) – Cantidad 1
Este (compensación 5) is the protective padding used at the primary contact point between the metal bracket and the cab. El Vibration Isolation Logic dictates that this pad, likely a high-density rubber component, absorbs and dampens the relentless high-frequency vibrations transmitted through the Soporte para extintor FAW J6P asamblea.
2. Componente: ‘Fire extinguisher bracket rear pad’ (5101242-A01) – Cantidad 5
Este (compensación 8) is the padding used at the rear mounting points. El Soporte para extintor FAW J6P uses five of these rear pads to fully isolate the entire rear surface of the assembly from the cab panel. Without these pads, the constant chafing would quickly damage the cab’s paint and potentially lead to metal fatigue in the cab structure itself, compromising the integrity of the Soporte para extintor FAW J6P instalación.
This final group includes the specialized, high-strength locking hardware essential for maintaining the safety and integrity of the Soporte para extintor FAW J6P against vehicle motion.
1. Componente: ‘Hex flange lock nut’ (CQ32608) – Cantidad 1
Este (compensación 7) is the primary locking hardware. El Lógica de bloqueo es primordial: this flange nut contains a mechanical feature (a locking thread or insert) that prevents it from backing off the bolt under vibration. This specific nut is used to secure the main structure of the Soporte para extintor FAW J6P to the cab.
2. Componente: 'Perno de brida hexagonal’ (Q1840835, Q1840825) – Cantidad 1 cada
Estos (compensación 3, 4) are the high-tensile bolts used to anchor the main bracket. They are characterized by a flange under the head, which distributes the clamping force over a wider area, preventing the bolt from sinking into the soft cab panel.
3. Componente: ‘Cross recessed pan head screw’ (Q2140820) – Cantidad 1
Este (compensación 6) is a low-torque fastener, likely used to attach the ‘Side bracket’ (compensación 2) to the main bracket (compensación 1) or to secure the final trim piece. El Soporte para extintor FAW J6P uses different fasteners depending on the load requirement.
La siguiente tabla proporciona la información completa, desglose detallado de todos 8 tipos de componentes en el Soporte para extintor FAW J6P Montaje para FAW Jiefang CA3250P66K2L1T1E 6×4 camión volcado. This list is essential for any service of the Soporte para extintor FAW J6P.
| Marca | Número de pieza. | Nombre de la pieza | Cantidad |
|---|---|---|---|
| 1 | 5101195-A01 | Fire extinguisher bracket and strap assy | 1 |
| 2 | 5101197-A01 | Soporte lateral para extintor | 2 |
| 3 | Q1840835 | Perno de brida hexagonal | 1 |
| 4 | Q1840825 | Perno de brida hexagonal | 1 |
| 5 | 5101241-A01 | Almohadilla frontal del soporte del extintor | 1 |
| 6 | Q2140820 | Tornillo de cabeza plana empotrado en cruz | 1 |
| 7 | CQ32608 | Hex flange lock nut | 1 |
| 8 | 5101242-A01 | Almohadilla trasera del soporte del extintor | 5 |
Las especificaciones para el Soporte para extintor FAW J6P are defined by its specialized retention and damping requirements, ensuring the extinguisher is both safe and accessible within the truck cab.
| Solicitud de vehículo | FAW Jiefang CA3250P66K2L1T1E 6×4 Camión de la basura |
| Grupo de sistema | Soporte para extintor FAW J6P |
| Lógica primaria | Emergency equipment retention and vibration isolation |
| Core Component P/N | 5101195-A01 (‘Fire extinguisher bracket and strap assy’) |
| Isolation Component | Rear pads (5101242-A01) and Front pad (5101241-A01) |
| Safety Hardware | Hex flange lock nut (CQ32608) |
| Tipos de componentes totales | 8 |
| Sistema asociado | Cab Interior / Safety Equipment. El Soporte para extintor FAW J6P is the anchor. |
piezas FAW, incluido el conjunto del bloque de cilindros, Se empaquetan con cuidado para garantizar una entrega segura.. Cada componente está asegurado con materiales protectores para evitar daños durante el transporte.. La red logística garantiza envíos puntuales en todo el mundo., apoyando operaciones de mantenimiento eficientes. A continuación se muestra una imagen que ilustra el embalaje estándar de las piezas de camiones FAW., mostrando la atención al detalle en el manejo y almacenamiento.
Este enfoque de embalaje minimiza el riesgo de corrosión o daños por impacto., asegurando que piezas como el conjunto de bloque de cilindros FAW lleguen en perfectas condiciones. Los clientes pueden confiar en la logística de FAW para obtener calidad y confiabilidad constantes.
FAW es uno de los fabricantes de automóviles más grandes y antiguos de China, con capital registrado de RMB 35.4 mil millones de yuanes y activos totales de RMB 457.83 mil millones de yuanes.
CHINA FAW GROUP CO., LIMITADO. (abreviatura de FAW), anteriormente China First Automobile Works, puede rastrear sus raíces hasta julio 15, 1953, cuando comenzó a construirse su primera planta de ensamblaje. FAW es uno de los fabricantes de automóviles más grandes y antiguos de China, con capital registrado de RMB 35.4 mil millones de yuanes y activos totales de RMB 457.83 mil millones de yuanes.
Ventas globales de camiones pesados en China “cinco seguidos”, ventas de camiones pesados a nivel mundial “seis seguidos”, venta de tractores para 16 años consecutivos líder absoluto en la industria.
