فاو J6P قفل الدائري: تفكيك 7 الأجزاء المهمة لتأمين الإغلاق الخالي من العيوب

This in-depth guide deconstructs the فاو J6P قفل الدائري حَشد, a core component of the cab system for the FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This part, also known as a striker, is the anchor point for the door. It is the critical part that ensures a secure, آمن, and weather-tight closure.

ال فاو J6P قفل الدائري (Part 6105125-A01) does not work in isolation. Its function is part of a 7-part system that also includes precision alignment pins and multiple weatherstrips. ل فاو J6P قفل الدائري لتعمل, the door must be perfectly aligned. This analysis will cover all 7 interdependent components.

جوهر 1: ال “الإغلاق & حماية” منطق (The FAW J6P Lock Ring)

This group is the heart of the assembly: ال فاو J6P قفل الدائري نفسها. It provides the fixed, high-strength anchor point on the cab’s B-pillar that the door’s internal latch mechanism locks onto.

1. عنصر: "المهاجم عاصي."’ (6105125-أ01) – الكمية 2

This is the core component, ال فاو J6P قفل الدائري, or striker assembly. It is a loop or bar of case-hardened steel, engineered to withstand thousands of latching cycles and immense slam forces.

ال منطق الإغلاق هي وظيفتها الأساسية. When the door closes, the rotating ‘claw’ of the door latch (في الباب) swings around and captures this loop. The latch then pulls the فاو J6P قفل الدائري, and thus the entire door, tightly against the cab body. This pulling action is what generates the compressive force needed for all the door seals to work.

ال منطق التجميع (عاصي) is important. هذا فاو J6P قفل الدائري is often coated in a high-density, low-friction polymer. This coating serves two purposes: it dampens the ‘metal-on-metal’ clang for a quieter, more refined sound, and it reduces wear on both the latch and the striker itself.

2. عنصر: 'برغي رأس غاطس متقاطع’ (س2540825) – الكمية 4
3. عنصر: 'غسالة ذات قفل زنبركي مدبب’ (Q41408) – الكمية 4

These are the high-strength fasteners for the فاو J6P قفل الدائري. Their design is critical for safety and function.

ال المنطق الغاطس of the Q2540825 screw is mandatory. The head must sit perfectly flush with the striker’s mounting plate. Any protruding screw head would foul the door’s latch mechanism, causing it to jam or fail to lock.

ال Vibration Logic is handled by the Q41408 lock washer. This tapered spring washer exerts constant tension, preventing the screws from backing out under the severe, constant vibration of a dump truck. فضفاضة فاو J6P قفل الدائري is a major safety hazard.

جوهر 2: ال “Pre-Alignment” منطق (The Pin Holder System)

This system works *before* the فاو J6P قفل الدائري يشارك. It provides the precision alignment and vertical support necessary for the latch to hit the striker.

1. عنصر: 'الباب الأمامي الأيسر لتحديد مقعد الدبوس’ (6101547-أ01) – الكمية 1
2. عنصر: 'الباب الأمامي الأيمن لتحديد مقعد الدبوس’ (6101548-أ01) – الكمية 1

This is the ‘locating pin holder’ or ‘seat’. It is the female receptacle on the B-pillar. The door has a male pin that slides into this holder.

ال منطق المحاذاة is to guide the door. الحامل لديه واسعة, tapered opening that funnels the pin into the exact, correct position. This ensures the door is perfectly aligned *before* the latch (في الباب) meets the فاو J6P قفل الدائري (جوهر 1). بدون هذا, the driver would have to slam the door multiple times to get it to catch.

ال Anti-Sag Logic هي وظيفتها الثانية. This pin holder bears the vertical weight of the heavy door, preventing ‘door sag’. This takes the load off the hinges and, الأهم من ذلك, off the فاو J6P قفل الدائري. The striker is designed for pulling forces, not to support the door’s weight.

3. عنصر: "ترباس شفة سداسية."’ (Q1840612F6) – الكمية 4

This is the fastener for the pin holder. إنه منطق شفة means the bolt has a built-in washer. This distributes the clamping load and resists the high shear forces from the door’s weight, ensuring the pin holder never shifts.

جوهر 3: ال “Latch-Dependent” منطق الختم (شرائط الطقس)

هذه المجموعة النهائية من المكونات, الأختام, are entirely dependent on the compressive force generated by the فاو J6P قفل الدائري (جوهر 1) and the alignment from the pin holder (جوهر 2).

1. عنصر: "شريط السير الوقائي الخارجي للباب الأمامي الأيسر."’ (6107015-أ01) – الكمية 1
2. عنصر: "شريط السير الوقائي الخارجي للباب الأمامي الأيمن."’ (6107020-أ01) – الكمية 1

This is the outer ‘beltline’ الختم الذي يتم تركيبه على الجزء الخارجي من الباب عند قاعدة النافذة. وظيفتها هي مسح الزجاج.

ال مسح المنطق يعتمد هذا الختم على فاو J6P قفل الدائري system to set the correct door position. If the door is not pulled in tightly, this seal will not make proper contact with the glass, allowing water streaks. إذا كان الباب يتدلى (from a failed pin holder), this seal will bind against the glass.

3. عنصر: "الختم العلوي للباب الأمامي."’ (6107031-A01-C00) – الكمية 2

هذا هو الشيء الرئيسي, body-mounted seal for the upper door frame. Its entire function is based on منطق الضغط. It is a soft bulb that must be squeezed to work.

This compression is generated *only* when the door latch pulls the فاو J6P قفل الدائري ضيق. If the striker is misaligned or worn, the door will not pull in far enough, and a gap will appear at the top. This gap is the primary source of wind noise (صفير) at high speeds and will allow rain to enter the cab. لذلك, the function of the فاو J6P قفل الدائري is the key to a quiet, dry cab.

فاو J6P قفل الدائري: استكمال 7 أجزاء انهيار

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 7 أنواع المكونات في فاو J6P قفل الدائري ومجموعة المحاذاة لـ FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة.

المواصفات الأساسية

المواصفات ل فاو J6P قفل الدائري are defined by its role as the cab’s primary latching and security anchor.