- Ville de ChangChun, Province du Jilin, Chine
par 
Welcome to this in-depth guide on the Film de garniture de porte FAW J6P Pour le FAW Jiefang CA3250P66K2L1T1E 6×4 tombereau. These are not just stickers; they are engineered, multi-layer exterior graphic assemblies. Ce guide détaille les 2 critical decal components, gauche et droite, that provide brand identity.
Le Film de garniture de porte FAW J6P is a key part of the truck’s visual identity and “trade dress.” It displays the J6P model designation and dynamic graphics, clearly separating this model from others in the FAW lineup. Cependant, it also serves a crucial protective function.
This teardown will analyze the left (3921011-B27) et à droite (3921012-B27) decals. We will explore the material science of the automotive-grade vinyl, the durability of the fade-resistant inks, the protective over-laminate, and the aggressive adhesive that ensures a long service life in extreme weather.
A peeling, fissuré, or faded Film de garniture de porte FAW J6P significantly degrades the truck’s appearance and perceived value. For a technician or body shop, understanding the correct application and removal process for this Film de garniture de porte FAW J6P is vital for a flawless, factory-quality collision repair.
This group consists of the two symmetrical components that create the visual branding on the cab doors. They are the primary components of the Film de garniture de porte FAW J6P système.
1. Composant: ‘J6P Left Side Decal’ (3921011-B27) – Quantité 1
Ce (Marque 1) is the specific graphic assembly for the driver’s side door (in Left-Hand Drive configurations). It is precision-cut to match the contours of the door panel and body lines, often wrapping around curves or aligning with door handles.
2. Composant: ‘J6P Right Side Decal’ (3921012-B27) – Quantité 1
Ce (Marque 2) is the corresponding mirrored decal for the passenger side. Both components are made from the same high-performance materials.
The Design Logic: La conception du Film de garniture de porte FAW J6P est double. D'abord, it clearly and boldly carries the ‘J6P’ branding, which is a key part of the vehicle’s model identity. Deuxième, the graphic elements (stripes, color blocks) are designed to complement the truck’s industrial design, adding a sense of motion and professionalism.
The Symmetrical Logic: These are supplied as distinct left and right parts. This is because the graphic elements are almost always asymmetrical or directional. A technician cannot use a left-side decal on the right side; it would appear upside down or backward.
The Paint Protection Logic: Une primaire, functional purpose of the Film de garniture de porte FAW J6P is to act as a sacrificial layer. The durable vinyl film protects the underlying, expensive cab paint from minor scuffs, boot marks from drivers climbing in, or scratches from brush and branches on a job site. This is a key value-retention feature for the truck.
La fondation du Film de garniture de porte FAW J6P is not paper. It is a high-performance polymer film, chosen for its flexibility and extreme durability in outdoor environments.
The Vinyl Logic: Automotive graphics are typically made from “calendered” ou “cast” vinyl. Cast vinyl is the premium option, as it is manufactured in a liquid state and “cast” into a sheet. This process results in zero internal stress, meaning the film is extremely stable and will not shrink over time.
The Conformability Logic: This material stability is what gives the Film de garniture de porte FAW J6P its high “conformability.” It can be heated and stretched to apply over complex curves, recesses, and body lines on the cab door without wrinkling, tenting, or lifting at the edges.
The Durability Logic: The vinyl substrate is engineered for a multi-year outdoor lifespan (typiquement 5-7 années). It is 100% waterproof and highly resistant to chemical attack. This means it can withstand repeated exposure to diesel fuel, hydraulic oil, sel de déneigement, and harsh truck-wash detergents without degrading or peeling.
The UV Stability Logic: The vinyl polymer itself is blended with high concentrations of UV inhibitors. This is the primary defense against the sun. These inhibitors prevent ultraviolet radiation from breaking down the polymer chains, which would otherwise make the Film de garniture de porte FAW J6P brittle, discolored, and lead to catastrophic cracking.
The visible graphic is a sophisticated, multi-layer system printed onto and then sealed over the vinyl substrate. La longévité du Film de garniture de porte FAW J6P depends on these layers.
The Ink Logic: Le “J6P” branding and graphic stripes are not printed with standard, water-based ink. They are printed using industrial-grade solvent, eco-solvent, or UV-cured inks. These inks are designed to chemically “mordre” into the vinyl substrate, essentially becoming part of the film itself. This process ensures the inks cannot be “washed off” or easily scratched away.
The Over-Laminate Logic: This is the most critical protective layer of the Film de garniture de porte FAW J6P. After the graphic is printed onto the base vinyl, the entire decal is laminated with a second, perfectly clear layer of vinyl or polyester. Ce “over-laminate” is the component’s primary armor and is completely invisible to the user.
The Function of Lamination (UV): This clear coat serves two main functions. D'abord, it provides 100% of the UV protection for the *inks* themselves. The inks, while durable, will fade under direct sunlight. The over-laminate acts as a powerful sunscreen, guaranteeing the colors stay vibrant for the life of the graphic.
The Function of Lamination (Mécanique): Deuxième, the over-laminate provides all the mechanical and chemical protection. It is the layer that gets scratched, hit by branches, and covered in road grime. It provides a smooth, “wipe-clean” surface. A non-laminated Film de garniture de porte FAW J6P would be destroyed by a single pass with a truck-wash brush.
A graphic is only as good as its adhesive. Le Film de garniture de porte FAW J6P uses a sophisticated, permanent adhesive designed for the unique challenges of a vehicle body.
The Adhesive Logic: This is not craft glue. It is an automotive-grade, solvent-based acrylic adhesive. It is “pressure-sensitive,” meaning the bond is activated by firm pressure from a squeegee. It is designed to be ‘low-tack’ at first (allowing for repositioning), but it builds a permanent, high-strength bond over 24-48 hours as it fully “wets out” and cures.
The Air-Egress Logic: Modern, large graphics like the Film de garniture de porte FAW J6P often use “air-egress” ou “bubble-free” technologie. The adhesive layer is not flat; it has microscopic, invisible channels. This allows a technician to squeegee out trapped air bubbles easily, resulting in a perfectly smooth, paint-like finish without bubbles.
The Backing Paper Logic: The decal is protected by a wax-coated or silicone-coated “release liner.” This paper liner protects the delicate adhesive from contamination (poussière, fingerprints) and is stable, so it doesn’t shrink or curl, which would damage the decal before installation.
La logique de service (Application): A technician must apply this Film de garniture de porte FAW J6P with extreme care. The surface must be perfectly clean, de-greased with isopropyl alcohol, and free of all wax or ceramic coatings. UN “wet” application (using a light mist of water and a drop of soap) is often preferred for a large decal, as it allows the graphic to be slid into its precise, factory-correct position before being squeegeed down.
La logique de service (Removal): Removing an old, baked-on Film de garniture de porte FAW J6P is a difficult, time-consuming process. A heat gun or industrial steamer is required to soften the vinyl and, plus important encore, the acrylic adhesive. The film is slowly peeled back, and the remaining adhesive residue must be removed with a specialized citrus-based solvent, not harsh chemicals that could damage the paint.
Le tableau suivant fournit l'intégralité, ventilation détaillée de tous 2 types de composants spécifiés pour le Film de garniture de porte FAW J6P système sur le FAW Jiefang CA3250P66K2L1T1E 6×4 tombereau.
| Marque | Partie no. | Nom de la pièce | Quantité |
|---|---|---|---|
| 1 | 3921011-B27 | J6P Left Side Decal | 1 |
| 2 | 3921012-B27 | J6P Right Side Decal | 1 |
Les spécifications pour le Film de garniture de porte FAW J6P are defined by its role as a durable, multicouche, automotive-grade exterior graphic.
| Demande de véhicule | FAW Jiefang CA3250P66K2L1T1E 6×4 Tombereau |
| Groupe système | Film de garniture de porte FAW J6P |
| Composant 1 | ‘J6P Left Side Decal’ (3921011-B27) |
| Composant 2 | ‘J6P Right Side Decal’ (3921012-B27) |
| Substrate Material | Cast or High-Performance Calendered Vinyl |
| Ink Type | UV-Cured or Solvent-Based (Fade-Resistant) |
| Protective Layer | Clear Vinyl or Polyester Over-Laminate |
| Adhesive Type | Pressure-Sensitive Acrylic (Permanent, Sans bulles) |
| Caractéristique clé 1 | Waterproof, Chemical-Resistant, Abrasion-Resistant |
| Caractéristique clé 2 | UV-Inhibited (Resists Fading & Cracking) |
| Fonction | Brand Identification and Paint Protection |
Pièces FAW, y compris l'ensemble bloc-cylindres, sont emballés avec soin pour garantir une livraison en toute sécurité. Chaque composant est sécurisé dans des matériaux de protection pour éviter tout dommage pendant le transport. Le réseau logistique garantit des expéditions ponctuelles dans le monde entier, soutenir des opérations de maintenance efficaces. Vous trouverez ci-dessous une image illustrant l'emballage standard des pièces de camion FAW., mettant en valeur l’attention portée aux détails dans la manipulation et le stockage.
Cette approche d'emballage minimise le risque de corrosion ou de dommages causés par les chocs., s'assurer que les pièces comme l'ensemble bloc-cylindres FAW arrivent en parfait état. Les clients peuvent compter sur la logistique de FAW pour une qualité et une fiabilité constantes.
FAW est l’un des constructeurs automobiles les plus anciens et les plus importants de Chine., avec un capital social de RMB 35.4 milliards de yuans et actif total en RMB 457.83 milliards de yuans.
CHINE FAW GROUP CO., LTD. (abréviation de FAW), anciennement China First Automobile Works, peut retracer ses racines jusqu'à juillet 15, 1953, lorsque sa première usine d'assemblage a commencé à être construite. FAW est l’un des constructeurs automobiles les plus anciens et les plus importants de Chine., avec un capital social de RMB 35.4 milliards de yuans et actif total en RMB 457.83 milliards de yuans.
Ventes mondiales de camions lourds en Chine “cinq de suite”, ventes de camions lourds dans le monde “six de suite”, ventes de tracteurs pour 16 années consécutives, leader absolu de l'industrie.
