FAW J6P مرآة الرؤية الخلفية اليمنى: فحص 7 الأجزاء المهمة للتوعية الشاملة بالمركبة

Welcome to this critical analysis of the FAW J6P مرآة الرؤية الخلفية اليمنى نظام FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This is one of the most complex visibility systems on the vehicle, essential for safety. This guide examines the 7 critical parts that create this multi-mirror assembly.

ال FAW J6P مرآة الرؤية الخلفية اليمنى is far more complex than the driver’s side. It is a triple-mirror system, combining the main rearview mirror with a “down-view” (kerb) mirror and a “front lower-view” مرآة. This setup is legally mandated in many regions to eliminate the truck’s massive passenger-side and forward blind spots.

This teardown will analyze all three mirror assemblies (رئيسي, Down-view, and Front-view), the decorative cover, and the three distinct sets of specialized mounting hardware. لفني, understanding this system is crucial for diagnosing electrical faults, replacing damaged glass, or ensuring all components of the FAW J6P مرآة الرؤية الخلفية اليمنى system are aligned.

We will deconstruct the logic of each mirror, from the heated, electric main mirror to the wide-angle convex blind-spot mirrors. A non-functional or missing part of this FAW J6P مرآة الرؤية الخلفية اليمنى system is a critical safety failure, especially when operating the CA3250P66K2L1T1E in tight urban areas or on crowded job sites.

جوهر 1: ال “Main View” منطق (The Primary Mirror)

This is the largest component of the FAW J6P مرآة الرؤية الخلفية اليمنى نظام, providing the primary rearward view for the driver.

1. عنصر: ‘Right Rearview Mirror Assy’ (8202020-A01J) – الكمية 1
هذا (علامة 1) هو الرئيسي, powered mirror assembly. It is the counterpart to the left-side mirror and includes the housing, mounting arm, dual glass, motors, and heater.

The Dual-View Logic: Like the driver’s side, هذا FAW J6P مرآة الرؤية الخلفية اليمنى head contains two separate pieces of glass. A large, flat primary mirror for accurate distance judgment, and a smaller, lower convex mirror to reveal the immediate side-lane blind spot.

المنطق الكهربائي: هذا عاصي’ is fully electric. It contains the 4-way adjustment motors for the primary glass, allowing the driver to set the view remotely. It also contains the integrated heating element laminated to the back of the glass, which is essential for melting ice and clearing fog to maintain visibility in all weather.

The Housing & Arm Logic: The system is built for durability. The components are housed in an aerodynamic, high-impact polymer shell. This shell is mounted on a rigid, cast-metal arm designed to be vibration-free. A vibrating mirror is unusable; this rigid arm is what ensures a clear, stable image.

منطق الخدمة: This 8202020-A01J assembly is the core of the FAW J6P مرآة الرؤية الخلفية اليمنى. It is replaced as a single unit if the glass is cracked, the heater fails, or the adjustment motors burn out. It is mounted to the door with 5 high-strength bolts (جوهر 4).

جوهر 2: ال “Kerb View” منطق (The Down-View Mirror)

This is the first and most critical blind-spot mirror in the FAW J6P مرآة الرؤية الخلفية اليمنى نظام. It is a separate, dedicated assembly.

1. عنصر: ‘Down-view Mirror Assy’ (8219010-A01-C00) – الكمية 1
هذا (علامة 2) هو “kerb” أو “down-view” مرآة. It is a non-powered, fixed-position mirror assembly that mounts separately to the passenger door, typically low and forward.

منطق السلامة: The sole purpose of this mirror is to show the driver the passenger-side front wheel and the area immediately beside the cab steps. This is a massive blind spot on all high-cab trucks. This mirror is essential for preventing the truck from running over low obstacles (like kerbs, bollards, or debris) during tight turns.

The Glass Logic: The glass in the ‘Down-view Mirror Assy’ is highly convex. هذا “fisheye” curvature provides an extremely wide, 180-degree+ field of vision. The view is distorted, but it allows the driver to see a huge area in a small reflection, prioritizing awareness over distance judgment.

The Mounting Logic: This component is mounted on its own rigid, dedicated arm, which is bolted to the passenger door’s exterior panel. It is positioned for the optimal downward-and-sideways view. It is a key part of the total FAW J6P مرآة الرؤية الخلفية اليمنى visibility solution.

منطق الخدمة: This mirror is in a highly vulnerable position and is often damaged in side-swipes or by tree branches. Replacement is a simple unbolt-and-rebolt procedure, using its dedicated fasteners (جوهر 4).

جوهر 3: ال “Forward View” منطق (The Front Mirror)

This is the second, and equally critical, blind-spot mirror. It is mounted in a completely different location from the main FAW J6P مرآة الرؤية الخلفية اليمنى.

1. عنصر: ‘Front Lower-view Mirror Assy’ (8219020-أ01) – الكمية 1
هذا (علامة 3) هو “front view” أو “cyclist mirror.” It is a non-powered, fixed assembly, typically mounted on the passenger-side A-pillar or above the passenger door, looking forward and down.

منطق السلامة: This mirror’s sole function is to eliminate the 2-3 meter “dead zone” *directly in front* of the cab’s bumper. From the high seating position of a J6P, this area is completely invisible. This mirror allows the driver to see pedestrians, cyclists, or short vehicles that have pulled up in front of them at a traffic light.

The Compliance Logic: This mirror is a direct response to new safety regulations (like those in Europe) designed to protect vulnerable road users. Its presence is a legal requirement for urban operation in many regions. It is a distinct sub-system of the overall FAW J6P مرآة الرؤية الخلفية اليمنى طَرد.

The Glass Logic: Like the kerb mirror, this uses a high-convexity lens to provide a wide, downward-facing view. It is designed to capture the entire area from the bumper outwards.

منطق الخدمة: This mirror is also in a vulnerable, forward-facing position. It is mounted on its own bracket and is replaced as a complete assembly (8219020-أ01) if the glass is cracked or the housing is damaged.

جوهر 4: ال “تصاعد & Finishing” منطق (الأجهزة & غطاء)

This group contains all the hardware and trim required to install the three separate mirrors that form the complete FAW J6P مرآة الرؤية الخلفية اليمنى نظام.

1. عنصر: ‘Right Lower Mounting Base Decorative Cover’ (8202022-أ01) – الكمية 1
هذا (علامة 4) is the cosmetic trim cover for the *main* mirror (جوهر 1). It snaps on over the mounting flange *inside* the cab, hiding the 5 mounting bolts (علامة 5). It is color- and texture-matched to the interior A-pillar trim.

2. عنصر: ‘Socket Head Cap Combination Screw’ (T2180630F6) – الكمية 5
هذا (علامة 5) is the set of 5 bolts for the main FAW J6P مرآة الرؤية الخلفية اليمنى. The socket head (Allen) drive allows high torque, and the captive combination washer prevents loosening from vibration.

3. عنصر: ‘Socket Head Cap Combination Screw’ (T2180650F6) – الكمية 2
هذا (علامة 6) is the set of 2 bolts for the ‘Down-view Mirror Assy’ (جوهر 2). They are a different part number (T2180650F6), implying a different length (50مم) is required.

4. عنصر: ‘Socket Head Cap Combination Screw’ (T2180625F6) – الكمية 2
هذا (علامة 7) is the set of 2 bolts for the ‘Front Lower-view Mirror Assy’ (جوهر 3). مرة أخرى, a different part number (T2180625F6) specifies a different length (25مم) for this application.

منطق الخدمة: This parts breakdown is critical for a technician. It shows that there are three separate mirror systems, each with its own unique mounting hardware. أ “vibrating” mirror diagnosis requires first identifying *which* mirror is vibrating, then finding the correct set of combination screws to re-torque. Using the wrong length bolt could fail to secure the mirror or damage the door skin.

FAW J6P مرآة الرؤية الخلفية اليمنى: استكمال 7 أجزاء انهيار

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 7 أنواع المكونات المحددة ل FAW J6P مرآة الرؤية الخلفية اليمنى النظام على FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة.

المواصفات الأساسية

المواصفات ل FAW J6P مرآة الرؤية الخلفية اليمنى are defined by its complex, multi-component design to eliminate all passenger-side blind spots.