FAW J6P Gas Spring: تفكيك 5 Critical Parts for Flawless Panel Lifting

هذا دليل فني شامل ل FAW J6P Gas Spring حَشد (الضميمة الأمامية) لفاو جيفانغ CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. هذا التفكيك يحلل 5 serviceable component types, detailing the main pneumatic strut, the heavy-duty mounting brackets, and the specific hardware.

ال FAW J6P Gas Spring is a critical component for both safety and convenience. Its primary function is to provide the lifting force required to open the heavy front enclosure panel (grille), and more importantly, to hold that panel securely in the open position. This allows for safe, hands-free access to daily service points like the engine oil dipstick, coolant reservoir, and washer fluid.

سوف يقوم هذا التفكيك بتحليل المكونات الرئيسية القابلة للخدمة في FAW J6P Gas Spring نظام. This includes the main gas-charged cylinder (the spring itself), the robust steel mounting brackets that anchor it to the cab and panel, and the high-tensile bolts that secure those brackets. فاشل FAW J6P Gas Spring is a significant safety hazard, as it can result in the heavy front panel collapsing on an operator. A properly functioning FAW J6P Gas Spring is essential for efficient daily maintenance.

جوهر 1: ال “Lift & Damping” منطق (The Gas Spring Assy)

This is the functional heart of the entire FAW J6P Gas Spring نظام. This single component provides both the lifting force and the controlled motion required for the heavy front panel.

1. عنصر: ‘Gas spring assy – الضميمة الأمامية’ (5302410-أ01) – الكمية 2
هذا (شركات 5) is the gas-charged strut. ال Pneumatic Lift Logic is that this is a sealed cylinder containing high-pressure nitrogen gas, separated from a small amount of hydraulic oil by a piston. The gas provides the “ربيع” force, constantly trying to extend the rod. This force is precisely calculated to be slightly more than the weight of the panel, allowing it to lift with minimal effort.

ال Hydraulic Damping Logic is the second crucial function. The piston inside the FAW J6P Gas Spring has a small orifice (hole). As the rod moves, it must push the hydraulic oil through this hole. This restriction provides damping, preventing the heavy front panel from flying open or slamming shut. This controlled, smooth motion is the signature of a healthy FAW J6P Gas Spring.

The most common failure mode for the FAW J6P Gas Spring is a seal failure. متأخر , بعد فوات الوقت, the main rod seal (which keeps the high-pressure gas inside) wears out. Gas slowly leaks, and the strut loses its ability to hold the panel up. This is a critical safety failure, as the panel can then fall unexpectedly. This component is not serviceable and must be replaced as a complete assembly.

جوهر 2: ال “Structural Anchor” منطق (The Mounting Brackets)

This group of components provides the structural mounting points that anchor the FAW J6P Gas Spring to the vehicle. These brackets must withstand the full, constant force of the gas struts.

1. عنصر: ‘Left lower bracket assy – gas spring’ (5302445-أ01) – الكمية 1
هذا (شركات 1) is the dedicated mounting bracket for the left-hand side. ال Load-Bearing Logic requires this to be a heavy-duty, مكون الصلب ملفقة. It is bolted directly to the vehicle’s rigid chassis or cab structure. يوفر “fixed” or lower anchor point for the FAW J6P Gas Spring.

2. عنصر: ‘Right lower bracket assy – gas spring’ (5302450-أ01) – الكمية 1
هذا (شركات 3) is the mirrored counterpart for the right-hand side. The use of distinct left and right brackets shows that the mounting points are asymmetrical, designed to fit a specific location on the chassis.

ال Articulation Logic أمر بالغ الأهمية. Gas springs do not mount rigidly; they must be able to pivot as the panel opens in an arc. These brackets (شركات 1 و 3) typically feature a ball stud (a small metal ball on a threaded post). The end of the FAW J6P Gas Spring (شركات 5) has an integrated socket that “snaps” onto this ball, allowing it to pivot freely. A worn or corroded ball stud on this FAW J6P Gas Spring bracket will cause the strut to bind, leading to a bent rod and complete system failure.

جوهر 3: ال “Retention” منطق (نظام التثبيت)

This final group includes the high-strength hardware used to secure the anchor brackets (جوهر 2) التابع FAW J6P Gas Spring system to the vehicle frame.

1. عنصر: ‘Combination bolt’ (CQ1460616F6) – الكمية 4 (المجموع)
هذا (شركات 2 و 4) is the primary mounting bolt. ال Vibration Resistance Logic أمر بالغ الأهمية. These four bolts (two for each bracket) are “combination” البراغي, meaning they have a pre-attached (captive) غسالة. This design ensures the clamping load is distributed over a wider area of the bracket, and more importantly, that the washer is never accidentally omitted during service.

These bolts are high-tensile and must be torqued to a specific factory setting. If these bolts become loose, كامل FAW J6P Gas Spring قوس (شركات 1 أو 3) will flex. This flexing will quickly fatigue the metal of the bracket or the bolt itself, leading to a catastrophic failure where the entire strut assembly detaches from the vehicle. This is why a simple bolt is a critical, non-negotiable part of the FAW J6P Gas Spring safety system.

FAW J6P Gas Spring: أكمل الانهيار المكون من 5 أجزاء

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 5 أنواع المكونات في FAW J6P Gas Spring تجميع FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This list is essential for ordering spare parts and performing a complete service of the FAW J6P Gas Spring.

المواصفات الأساسية

المواصفات ل FAW J6P Gas Spring are defined by its function as a high-pressure pneumatic strut, providing the lift and damping force for the heavy front enclosure panel.