FAW J6P Gearshift Guard: Breaking Down 3 Critical Parts for Flawless Cabin Integration

Welcome to this essential teardown of the FAW J6P Gearshift Guard لفاو جيفانغ CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This is not just a piece of trim; it is a critical interface and storage module. هذا الدليل يكسر 3 core components that form the complete assembly for flawless service.

ال FAW J6P Gearshift Guard is a multi-function component that is central to the cab’s interior. It serves several crucial functions: it acts as a protective housing for the gearshift linkage, it provides vital sound and thermal insulation from the transmission tunnel, and it integrates essential, at-hand storage for the driver.

In the high-vibration environment of a CA3250P66K2L1T1E dump truck, a component like this must be engineered for extreme durability. A poorly designed guard will rattle, squeak, and transmit excessive heat and noise into the cab, leading to driver fatigue and complaints. This deconstruction will analyze the main guard (5305011-B27) and its integrated storage box (5305021-B27).

We will explore the logic behind its material selection (typically high-impact, textured PC-ABS), its structural mounting points, and the way its components are assembled. لفني, understanding the FAW J6P Gearshift Guard is key to performing interior service, diagnosing noise, اهتزاز, والقسوة (NVH) مشاكل, or replacing damaged parts correctly.

جوهر 1: ال “Structural Housing” منطق (The Main Guard)

This is the largest component and the foundation of the FAW J6P Gearshift Guard. It forms the visible, جمالي “console” that surrounds the gear lever.

1. عنصر: ‘Gearshift Guard’ (5305011-B27) – الكمية 1
هذا (علامة 1) is the main structural housing. It is a large, complex, injection-molded part that is precisely shaped to fit the cab’s floor panel and the lower dashboard.

المنطق المادي: This guard is not made of simple, flimsy plastic. It is molded from an engineered thermoplastic, typically a PC-ABS (Polycarbonate / Acrylonitrile Butadiene Styrene) blend. يتم اختيار هذه المادة لمزيجها المتميز من الخصائص: high impact strength (to resist cracking from boots or tools), high-temperature resistance (to withstand heat from the transmission tunnel), and UV stability (to prevent fading).

The Acoustic Logic: A primary, unseen function of the FAW J6P Gearshift Guard is noise, اهتزاز, والقسوة (NVH) يتحكم. The large surface area of the guard acts as an acoustic barrier. It is often backed with a layer of sound-deadening felt or foam (غير مدرجة, but part of the assembly) to absorb and block transmission gear whine and road noise from entering the cab.

المنطق الحراري: The transmission tunnel on a heavy-duty truck can become extremely hot. هذا FAW J6P Gearshift Guard acts as a heat shield, protecting the driver’s legs from radiant heat and helping the climate control system operate more efficiently.

The Aesthetic Logic: This component is a major part of the cab’s interior design. The surface is given a “technical grain” or texture (a process done inside the injection mold) that makes it resistant to scratches, scuffs, and fingerprints. This texture also reduces glare, which is a key safety consideration.

منطق الخدمة: This main guard is the part that takes the most abuse. It is often cracked by heavy objects or broken during dashboard service. A technician replacing the 5305011-B27 must carefully disconnect the storage box (جوهر 2) and any underlying electrical connectors (like the Hi/Lo range switch) before unbolting the main guard from the floor.

جوهر 2: ال “Utility” منطق (The Storage Box)

This component is a sub-assembly that is integrated directly into the main guard, توفير أساسي, at-hand storage for the driver.

1. عنصر: ‘Gearshift Guard Storage Box’ (5305021-B27) – الكمية 1
هذا (علامة 2) is the storage box module. المذكرة “(配备储物盒)” أو “with Storage Box” confirms this is a key feature of the FAW J6P Gearshift Guard. This box is typically mounted in the rear section of the main guard, accessible to the driver.

The Ergonomic Logic: This box is designed for “at-a-glance” utility. It provides a convenient, secure place for the driver to store essential items like logbooks, pens, keys, or a phone, preventing them from sliding around the cab.

The Construction Logic: This box is molded from the same durable PC-ABS material as the main FAW J6P Gearshift Guard to ensure a perfect color and texture match. It is often designed with a non-slip rubber mat at the bottom to prevent items from rattling.

The Integration Logic: This component is not just glued in; it is designed to be mechanically fastened *to* the main guard (جوهر 1). It uses tabs, clips, or its own set of small screws (not detailed in this diagram) to create a single, solid assembly. This two-piece construction (guard + صندوق) is often simpler and stronger to manufacture than molding one, extremely complex part.

منطق الخدمة: A common failure is a cracked storage box, or the box itself coming loose from the main guard. A technician would service this by first removing the entire FAW J6P Gearshift Guard assembly from the floor, then turning it over to access the fasteners that secure this storage box (5305021-B27) to the main guard (5305011-B27).

جوهر 3: ال “تصاعد” منطق (The Fasteners)

These are the critical fasteners that secure the entire FAW J6P Gearshift Guard حَشد (جوهر 1 و 2) to the cab’s floor panel or transmission tunnel.

1. عنصر: ‘Cross recessed pan head combination screw’ (Q2360616F6) – الكمية 3
هذا (علامة 3) is a set of three specific, high-reliability screws. The small quantity suggests they are for key structural mounting points, supplemented by hidden clips.

The Combination Screw Logic: The name ‘Combination Screw’ (组合螺钉) أمر بالغ الأهمية. It means each screw (Q2360616F6) has a pre-installed, غسالة أسيرة (likely a spring lock washer and a flat washer). This is a non-negotiable feature for a high-vibration environment.

This design ensures that the locking washer is present every time and exerts constant tension. This tension prevents the FAW J6P Gearshift Guard from vibrating loose, which is the number one cause of interior squeaks and rattles.

The Head Logic: “Cross recessed pan head” (十字槽平圆头) specifies a Phillips drive with a low-profile, wide head. This pan head distributes the clamping load over a wider area of the plastic guard, preventing the screw from cracking the mounting boss or pulling through the hole.

منطق الخدمة: When a driver reports a “loose” أو “من الطراز الأول” FAW J6P Gearshift Guard, a technician’s first action is to locate and check the torque on these three screws. They are often hidden under small cosmetic caps or beneath the storage box’s rubber mat. They must be tight, but not over-torqued, as this could strip the floor-pan threads.

FAW J6P Gearshift Guard: أكمل الانهيار المكون من 3 أجزاء

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 3 أنواع المكونات المحددة ل FAW J6P Gearshift Guard النظام على FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة.

المواصفات الأساسية

المواصفات ل FAW J6P Gearshift Guard are defined by its role as a structural, acoustic, and utility component of the cab interior.