Бампер передний FAW J6P: Деконструкция 13 Важные детали для безупречной защиты рамы

This is a technical deconstruction of the Бампер передний FAW J6P, designed for the FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. В этом руководстве подробно описаны 13 типы обслуживаемых компонентов, including the main sections, integrated steps, and hardware, providing a complete guide for repair and replacement.

The Бампер передний FAW J6P is a multi-piece, modular assembly engineered for durability and serviceability. As the first line of defense for the chassis in harsh, off-road conditions, its design is critical. It is not a single piece, but a three-part system (левый, верно, and center) allowing for a damaged section to be replaced without replacing the entire unit. This deconstruction will analyze the main structural components, the integrated access steps, and the specific high-strength hardware used to mount the Бампер передний FAW J6P к раме грузовика. A fully intact Бампер передний FAW J6P is essential for both vehicle protection and operator safety.

Основной 1: The “Structural Foundation” Логика (The 3-Piece Assembly)

This group represents the main body of the Бампер передний FAW J6P. The 3-piece design is a critical engineering choice for heavy-duty dump trucks, prioritizing serviceability and reduced repair costs.

1. Компонент: ‘Bumper Middle Assy’ (2803010-70ты) – Кол-во 1
Этот (Комп 8) is the central, structural backbone of the Бампер передний FAW J6P. It is typically the largest and strongest section, as it protects the radiator and engine components directly behind it. It also serves as the mounting base for the license plate holder (Комп 12).

2. Компонент: ‘Front Bumper Left Assy’ (2803035-70ты) & ‘Front Bumper Right Assy’ (2803040-70ты) – Кол-во 1 каждый
Эти (Комп 1 & 2) are the corner sections of the Бампер передний FAW J6P. The Modular Logic is that these corners are the most frequently damaged parts in off-road or construction site incidents. By making them separate, bolt-on assemblies, a technician can replace just the damaged corner instead of the entire Бампер передний FAW J6P, saving significant time and cost.

This 3-piece design is fundamental to the Бампер передний FAW J6P‘s role on a dump truck. It ensures that impact damage can be localized and repaired efficiently, maximizing vehicle uptime. Весь Бампер передний FAW J6P assembly is designed to absorb and deflect impacts, protecting the more critical frame rails and steering components.

Основной 2: The “Operator Access” Логика (The Integrated Steps)

A key feature of the Бампер передний FAW J6P is its integration of secure, anti-slip steps. These are essential for allowing the driver to safely clean the windscreen or perform daily checks.

1. Компонент: ‘Left Upper Step’ (2803031B71A) & ‘Right Upper Step’ (2803032B71A) – Кол-во 1 каждый
Эти (Комп 3 & 4) are the primary access steps integrated into the top surface of the left and right bumper sections. They are designed with aggressive tread patterns to provide grip even when wet or muddy. These are critical safety features of the Бампер передний FAW J6P.

2. Компонент: ‘Upper Step – Front Bumper’ (2803096-70ты) – Кол-во 1
Этот (Комп 10) is the central upper step, likely mounted on the ‘Bumper Middle Assy’ (Комп 8). This component provides a continuous, safe platform across the entire width of the Бампер передний FAW J6P, allowing the operator to move from side to side without stepping down.

The Access Logic принадлежащий Бампер передний FAW J6P demonstrates a design that considers operator workflow. These components are not just aesthetic; they are functional tools that improve maintenance efficiency and safety. A proper Бампер передний FAW J6P includes these secure stepping surfaces.

Основной 3: The “Ancillary & Застежка” Логика (Система крепления)

This group includes the final components and the critical hardware used to assemble the Бампер передний FAW J6P and attach it to the vehicle.

1. Компонент: ‘License Plate Holder Assy’ (2803080А71А) – Кол-во 1
Этот (Комп 12) is the dedicated bracket for mounting the front license plate. It is a serviceable part, designed to be bolted onto the ‘Bumper Middle Assy’ (Комп 8) using ‘Cross recessed pan head screws’ (Комп 13, Q2360516F6).

2. Компонент: «Прокладка – floor heat shield’ (5109318-А01) – Кол-во 2
Этот (Комп 6) is a specialized gasket. Its presence suggests that a part of the Бампер передний FAW J6P assembly is close to a high-heat source (like the exhaust or turbo piping). This gasket is likely used to protect the bumper’s paint or composite materials from heat damage, or to protect the cab floor.

3. Компонент: Fastener Group (Q2360516, CQ32606, CQ34005)
This group includes ‘Cross recessed pan head screws’ (Комп 5, Кол-во 10), ‘Hex flange lock nuts’ (Комп 9, Кол-во 6), и «Шестигранные гайки’ (Комп 11, Кол-во 2). The Логика крепления is critical for a high-vibration component like the Бампер передний FAW J6P. The use of ‘lock nuts’ (Комп 9) намеренно, as they provide prevailing torque to prevent the nuts from backing off, обеспечение Бампер передний FAW J6P remains secure to the chassis.

Бампер передний FAW J6P: Complete 13-Part Breakdown

В следующей таблице представлена ​​полная, подробная разбивка всех 13 типы компонентов в Бампер передний FAW J6P сборка для FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. This list is essential for ordering spare parts and performing repairs on the Бампер передний FAW J6P.

Основные характеристики

Технические характеристики Бампер передний FAW J6P are defined by its modular, heavy-duty construction designed for the demanding environment of a 6×4 самосвал. Understanding these specifications is key to ordering the correct Бампер передний FAW J6P части.