جهاز الرفع FAW J6P: تفكيك 7 الأجزاء المهمة للتحكم في النوافذ بشكل لا تشوبه شائبة

Welcome to this definitive technical guide on the جهاز الرفع FAW J6P, also known as the window regulator, لفاو جيفانغ CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This analysis deconstructs the 7 critical component types that make up this essential electro-mechanical system.

ال جهاز الرفع FAW J6P is the core “عضلة” inside the truck’s door, responsible for raising and lowering the heavy front door glass. This system must provide high torque, precise control, and extreme reliability. It is engineered to withstand the high-vibration environment of a construction site and the high-use cycle of a daily-driven vehicle. This guide will analyze the core regulator assembly, the glass it lifts, and all specialized, vibration-proof fasteners.

جوهر 1: The ‘Motive Force’ منطق (The Regulator Assembly)

This component is the heart and namesake of the جهاز الرفع FAW J6P نظام. It is a sealed, pre-assembled electro-mechanical unit that provides the force to move the window.

1. عنصر: ‘Left/Right front door electric window regulator assembly’ (6104025AA01 / 6104030AA01) – الكمية 1 كل
هذا (شركات 5) is the core assembly. It includes a high-torque 12V DC electric motor, a self-locking worm gear drive, and a steel “scissor-lift” آلية.

The Electric Logic is what provides the power. The motor is activated by the driver’s switch, turning a worm gear. This gearbox multiplies the motor’s torque significantly, allowing it to easily lift the heavy tempered glass. A key feature is the worm drive, which is self-locking. This means the window cannot be physically pushed down from the outside, providing security.

The Mechanical Logic lies in the “scissor-lift” تصميم. هذا هو “X” shaped set of stamped steel arms that converts the motor’s rotational force into a perfectly vertical, stable lift. This mechanism is responsible for pushing the glass up and guiding it down without letting it tilt or bind.

هذا بأكمله جهاز الرفع FAW J6P is the central component within the door. It mounts to the door’s structural guide rails, and the glass panel (شركات 3) bolts directly to its “saddle.” This assembly is the most common point of failure, typically from motor burnout or a snapped cable in the lift mechanism.

جوهر 2: The ‘Structural Mounting’ منطق (Regulator Fasteners)

This group represents the specialized hardware—20 pieces in total—that rigidly secures the جهاز الرفع FAW J6P (شركات 5) to the door’s inner frame and guide rails.

1. عنصر: ‘Combination bolt’ (CQ1461035) – الكمية 12
هؤلاء (شركات 4) are the primary structural bolts. ال “combination” name signifies they have a pre-installed, captive spring lock washer. This is a critical anti-vibration feature. هؤلاء 12 البراغي (6 per door) secure the main body of the regulator to the door’s inner guide rails.

2. عنصر: ‘Cross recessed countersunk head screw’ (Q2540622S) – الكمية 4
3. عنصر: ‘Outer-serrated locking washer’ (Q41206) – الكمية 4
هذا (شركات 6 و 7) is a two-part, high-strength fastener set. The countersunk screw sits flush in the guide rail, while the ‘outer-serrated’ washer provides an aggressive locking action. Its teeth bite into both the screw and the frame, making it impossible for vibration to loosen the connection.

The Vibration-Proof Logic is the unifying principle here. A loose جهاز الرفع FAW J6P would rattle and, والأهم من ذلك, would misalign, causing the window to jam. Every fastener used—both the combination bolts and the serrated washer sets—is specifically chosen to lock the threads and withstand the severe, constant vibration of a dump truck.

جوهر 3: The ‘Associated Load’ منطق (The Glass Panel)

This component is not part of the جهاز الرفع FAW J6P نفسها, but it is the “حمولة” that the device is designed to move. The entire system is engineered around the weight and shape of this part.

1. عنصر: ‘Left/Right front door glass’ (6103021-أ01 / 6103022-أ01) – الكمية 1 كل
هذا (شركات 3) is the tempered safety glass panel. Its significant weight is the primary factor in determining the required torque for the regulator’s motor (شركات 5).

The Interaction Logic is crucial. The glass has precision-drilled mounting holes at the bottom. These holes align perfectly with the “سرج” التابع جهاز الرفع FAW J6P, allowing it to be securely bolted on.

بالإضافة إلى, the polished edges and slight curvature of the glass are designed to interact with the door’s flocked guide channels. Any friction in those channels (على سبيل المثال, from wear or dirt) increases the “حمولة” on the جهاز الرفع FAW J6P, reducing its service life. A failed regulator is often a symptom of worn-out, high-friction guide channels.

جوهر 4: The ‘Load Fastener’ منطق (The Glass Mounts)

This final group of 12 fasteners is responsible for the single most critical connection: attaching the glass panel (the load) إلى جهاز الرفع FAW J6P (the muscle).

1. عنصر: ‘Cross recessed flat round head combination screw’ (Q2360612F6) – الكمية 6
2. عنصر: ‘Cross recessed flat round head combination screw’ (Q2360612) – الكمية 6
These two sets (شركات 1 و 2), while having slightly different part numbers, serve the same function. They are the 12 screws (6 per door) that pass through the glass panel and secure it to the regulator’s saddle.

The Clamping Logic must be precise. These screws are designed to be torqued to a specific value. They clamp the glass against the regulator, usually with a rubber or nylon grommet in between to prevent a glass-on-metal stress point.

ال “مزيج” screw design, with its built-in locking washer, is absolutely essential here. These screws are subjected to the entire “يدفع” و “يحذب” force from the جهاز الرفع FAW J6P, plus the jarring shock of every door slam. A standard screw would back out in days. The locking washer maintains constant tension, ensuring the glass never loosens from its lifting mechanism.

جهاز الرفع FAW J6P: استكمال 7 أجزاء انهيار

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 7 أنواع المكونات في جهاز الرفع FAW J6P and window assembly (System 146) لفاو جيفانغ CA3250P66K2L1T1E 6×4 تفريغ الشاحنة.

المواصفات الأساسية

المواصفات ل جهاز الرفع FAW J6P are defined by its function as the primary motor and regulator for the door window.