مكونات السجاد FAW J6P: تفكيك 9 الأجزاء المهمة لعزل الكابينة بشكل لا تشوبه شائبة

This is a concise technical guide to the مكونات السجاد FAW J6P تجميع FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. هذا التفكيك يحلل 9 serviceable component types, detailing the multi-piece floor mats, protective trim strips, and the securing hardware that seals the cab floor.

ال مكونات السجاد FAW J6P system is an essential part of the vehicle’s interior. While seemingly simple, its functions are crucial for ergonomics, noise reduction, and structural protection. This system includes specialized mats and retention strips designed to fit the unique contours of the cab floor, which often feature complex shapes due to the transmission tunnel and suspension mounts.

The multi-piece design of the مكونات السجاد FAW J6P (غادر, center, يمين) allows for easier installation and quick removal for cleaning. This deconstruction will analyze the three main mats, the four critical sealing trim strips, and the heavy-duty fastening system used to anchor the entire assembly. A properly fitted set of مكونات السجاد FAW J6P ensures driver safety by providing a non-slip floor and protecting the expensive underlying electronics and cab metalwork from moisture and abrasion.

جوهر 1: ال “صوتي & Thermal” منطق (The Mats)

This group of مكونات السجاد FAW J6P provides the primary sound and heat barrier between the noisy chassis and the cab. Their dense material construction is key to driver comfort.

1. عنصر: ‘Left floor mat’ (5109221-B35) – الكمية 1
هذا (شركات 1) covers the main driver-side floor area. ال Noise Reduction Logic is that this thick material significantly dampens road noise and engine vibration transfer.

2. عنصر: ‘Right floor mat’ (5109222-B35) – الكمية 1
هذا (شركات 2) covers the passenger-side area. Both mats must be fire-retardant and highly durable to resist constant boot traffic and wear.

3. عنصر: ‘Center floor mat’ (5109226-B35) – الكمية 1
هذا (شركات 3) is designed to drape over the large transmission tunnel. This area is the highest source of heat and noise. The center mat is the most crucial of the مكونات السجاد FAW J6P for thermal isolation.

جوهر 2: ال “Retention & ختم” منطق (Trim Strips)

This group of components provides the critical security and peripheral sealing for the مكونات السجاد FAW J6P, anchoring them to the door sills.

1. عنصر: ‘Left/Right door sill front trim strip’ (5109511/512-B27) – الكمية 1 كل
هذا (شركات 4, 5) is a plastic or metal strip that covers and seals the forward edge of the carpet near the door opening. ال منطق الختم ensures the edge of the carpet is pressed firmly against the cab floor, preventing water or dirt ingress.

2. عنصر: ‘Left/Right door sill middle trim strip’ (5109521/522-B27) – الكمية 1 كل
هذا (شركات 6, 7) is the middle section of the trim strip. وهذا يضمن مكونات السجاد FAW J6P are secured across the full length of the door opening, preventing the mats from lifting up.

ال Safety Retention Logic of these trim strips is vital. Loose floor mats can bunch up under the clutch or brake pedal, leading to a dangerous loss of control. By firmly securing the مكونات السجاد FAW J6P with these strips, this safety hazard is eliminated.

جوهر 3: ال “تصاعد” منطق (الأجهزة)

This group includes the hardware required to permanently attach the trim strips and, indirectly, ال مكونات السجاد FAW J6P, to the cab structure.

1. عنصر: 'برغي رأس المقلاة المجوف’ (Q2140616F6) – الكمية 12
هذا (شركات 8) is the primary screw for securing the various trim strips (شركات 4-7). ال Recessed Head Logic ensures the head sits flush or below the surface of the trim strip, preventing snagging or tripping hazards for the driver.

2. عنصر: ‘Large washer’ (Q40206F6) – الكمية 12
هذا (شركات 9) is used in conjunction with the screws (شركات 8). ال Load Distribution Logic dictates that this washer distributes the clamping force over a wider area of the plastic trim strip, preventing the screw head from cracking the trim when tightened down. This is crucial for the longevity of the مكونات السجاد FAW J6P trim.

3. عنصر: Maintenance Focus
The entire fastening system for the مكونات السجاد FAW J6P is designed to be easily removable by a service technician. لكن, due to constant temperature cycling and vibration, these fasteners should be checked periodically to ensure the mats remain secure and the trim strips are not rattling against the cab structure. This small maintenance step greatly increases the effective service life of the مكونات السجاد FAW J6P.

مكونات السجاد FAW J6P: Complete 9-Part Breakdown

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 9 أنواع المكونات في مكونات السجاد FAW J6P تجميع FAW Jiefang CA3250P66K2L1T1E 6×4 تفريغ الشاحنة. This list is essential for ordering spare parts and performing a complete service of the مكونات السجاد FAW J6P.

المواصفات الأساسية

المواصفات ل مكونات السجاد FAW J6P are defined by its multi-piece design, ensuring acoustic isolation, ease of cleaning, and precise fitment across the cab floor.