Критическое руководство: Фильтр тонкой очистки топлива FAW в сборе для трактора CA4251P66K24T1A3E5

Welcome to this critical guide on the Топливный фильтр тонкой очистки FAW (Часть №. 1117010-81Д), the most important line of defense for the high-pressure fuel injection system on the FAW Jiefang CA4251P66K24T1A3E5 6×4 дизельный полуприцеп тягач.

This component is not just a simple screen; the modern Топливный фильтр тонкой очистки FAW is an advanced multi-stage coalescing and filtration unit. Its sole purpose is to remove microscopic abrasive particles and, самое главное, all traces of water from the diesel fuel before it reaches the multi-thousand-PSI common rail pump and injectors.

Это руководство является важным ресурсом для профессиональных технических специалистов., менеджеры по техническому обслуживанию автопарка, и специалисты по запчастям. Мы разберем всю Топливный фильтр тонкой очистки FAW сборка, including its permanent mounting base, its replaceable cartridge, and its rigid support bracket, down to the last serviceable nut and bolt.

Core System: The Base (7020) and Element (7050)

The parts list for Mark 1 details the three key components of the Топливный фильтр тонкой очистки FAW система. The parent part is the ‘Fuel Fine Filter Assembly’ (1117010-81Д), which is the complete unit. This assembly is comprised of two distinct serviceable parts:

**1. The ‘Fuel Fine Filter Base Assembly’ (1117020-81Д):** This is the permanent, non-replaceable “голова” системы. It is a precision-cast aluminum housing that bolts to the main bracket. This base contains the fuel inlet and outlet ports, резьбовое крепление фильтрующего элемента, and likely the ports for a fuel pre-heater and a “Water-in-Fuel” (WiF) датчик. This base is the control hub for the entire Топливный фильтр тонкой очистки FAW.

**2. The ‘Fuel Fine Filter Element Assembly’ (1117050-81Д):** Это “service part” or the cartridge. This is the replaceable, spin-on canister that contains the actual filter media. During a service, this element is the only part of the Топливный фильтр тонкой очистки FAW (1117010-81Д) that is discarded and replaced. Its design is crucial for protecting the engine.

Understanding this relationship is key: the Base (7020) and the Element (7050) combine to create the complete ‘Fuel Fine Filter Assembly’ (7010). A technician services the element, but the base remains fixed to the truck. This modularity is a core part of the Топливный фильтр тонкой очистки FAW дизайн.

Почему “Fine” Filtration is Critical for HPCR Engines

Имя “Топливный тонкий фильтр” это не маркетинговый термин; it is a critical engineering specification. Этот Топливный фильтр тонкой очистки FAW is the final, and most important, stage of filtration before the fuel enters the High-Pressure Common Rail (HPCR) система впрыска. This system’s components, particularly the injectors, are built to tolerances of less than 3-5 микроны (a human hair is about 70 микроны).

**1. Abrasive Particle Removal:** The primary job of the Топливный фильтр тонкой очистки FAW media is to trap microscopic hard particles. This includes silica (мелкая грязь) that may get past the primary filter, and rust or metal flakes from fuel tanks and stations. If even one of these particles reaches the injector, it acts like a sandblaster, eroding the injector’s delicate pintle and nozzle seat. This erosion causes the injector to leak, resulting in poor fuel atomization, черный дым, высокий расход топлива, and eventual engine failure.

**2. Water Coalescing (Separation):** The secondary, and equally critical, функция Топливный фильтр тонкой очистки FAW is water separation. Diesel fuel naturally absorbs and carries water. This water is catastrophic for an HPCR system. Первый, it causes rust and corrosion on the precision-machined internal surfaces of the pump and injectors. Второй, when water (который несжимаем) is subjected to 30,000+ пси, it can instantly blow the tip off an injector. The advanced media in the Топливный фильтр тонкой очистки FAW является “гидрофобный.” It repels water, forcing the tiny emulsified water droplets to “сливаться” (merge) в более крупный, более тяжелые капли, which then fall out of the fuel flow and are collected in a bowl at the bottom of the filter assembly, where they can be drained.

Using a non-genuine filter element can destroy this engine. A cheap filter that cannot meet the “fine” micron rating or cannot properly coalesce water will allow these contaminants to pass, leading to thousands of dollars in repairs to the fuel injection system. Весь Топливный фильтр тонкой очистки FAW сборка (1117010-81Д) is the gatekeeper that protects the engine’s most expensive components. Это делает Топливный фильтр тонкой очистки FAW one of the most important serviceable parts on the entire truck.

Структурное крепление: Кронштейн в сборе (1117120-81Д)

The ‘Fuel Fine Filter Bracket Assembly’ (1117120-81Д) is the structural foundation for the entire system. Это тяжелая работа, stamped steel bracket designed to be bolted directly to the truck’s main chassis frame rail.

Its function is two-fold. Первый, it provides a stable, rigid mounting location for the ‘Fuel Fine Filter Base Assembly’ (1117020-81Д). This is crucial for preventing the heavy, fuel-filled filter assembly from vibrating. Второй, it isolates the Топливный фильтр тонкой очистки FAW system from the high-frequency vibrations of the engine. By mounting the filter on the “sprung” chassis instead of the “unsprung” двигатель, the fuel lines and fittings are subjected to far less stress, preventing fatigue, трещины, and dangerous high-pressure fuel leaks.

Fastener System Breakdown (Marks 3, 4, 5, 6)

The parts list details a specific set of high-tensile fasteners to secure the Топливный фильтр тонкой очистки FAW система. This hardware is not optional; it is engineered for this specific application.

**Bracket-to-Chassis Fasteners:** Болты с шестигранной головкой’ (Q1841075 and Q1841020), with two of each, are the main bolts that secure the ‘Bracket Assembly’ (1117120-81Д) to the truck’s frame rail. The different part numbers indicate different lengths, required for the specific geometry of the chassis mount. The flange head is critical for spreading the load and resisting loosening from road vibration.

**Base-to-Bracket Fasteners:** The two ‘Hex flange bolts’ (Q1841030) and two ‘Hex nuts’ (CQ34010) are the hardware used to secure the ‘Fuel Fine Filter Base Assembly’ (1117020-81Д) *to* the ‘Bracket Assembly’. This bolt-and-nut combination allows the base to be securely “sandwiched” onto the bracket, creating the final, жесткий Топливный фильтр тонкой очистки FAW сборка.

FAW Fuel Fine Filter Parts List

В следующей таблице представлена ​​полная, detailed breakdown of all components identified in the ‘Fuel Fine Filter’ схема трактора FAW CA4251P66K24T1A3E5. Обслуживание Топливный фильтр тонкой очистки FAW (1117050-81Д) is a critical maintenance task.

Технические характеристики и контекст сборки

Технические характеристики Топливный фильтр тонкой очистки FAW are defined by its function as the final protection for the High-Pressure Common Rail (HPCR) система впрыска. Весь Топливный фильтр тонкой очистки FAW assembly is a critical component.