Скруббер FAW J6P: Деконструкция 4 Важные детали для безупречной очистки лобового стекла

Это подробное техническое руководство по Скруббер FAW J6P сборка для FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. Эта деконструкция анализирует 4 типы основных компонентов, detailing the integrated pump/reservoir unit, the mounting hardware, and the necessary hose routing security components.

The Скруббер FAW J6P system is a fundamental active safety feature. Its role is to quickly restore the driver’s clear visual field by spraying cleaning fluid onto the windscreen, often under conditions where the glass is heavily coated in mud or grit. The system is designed to provide high-volume fluid delivery and maintain functionality in extreme heat and cold. The central component is the ‘Scrubber assy’ (Комп 1), which integrates both the fluid reservoir and the electric pump motor into a single, compact unit.

This deconstruction will analyze the mechanical retention system (Комп 2) that anchors the heavy, fluid-filled reservoir to the chassis, as well as the specialized hose and wiring routing components (Комп 3, 4) essential for preventing wear. Сохранение целостности Скруббер FAW J6P is paramount for safety, as a failure during adverse weather conditions can suddenly blind the driver. The reliability of the Скруббер FAW J6P is critical for legal compliance and safe operation of the dump truck.

Основной 1: The “Fluid & Pump” Логика (The Integrated Assy)

Основная функция Скруббер FAW J6P relies on the seamless integration of fluid storage and pressurized delivery to the windshield nozzles (нет в списке, but implied).

1. Компонент: ‘Scrubber assy’ (5207010BA01) – Кол-во 1
Этот (Комп 1) is the entire functional mechanism. The Integrated Reservoir Logic is paramount: this assembly contains the fluid tank, the submersible electric pump, and the fluid level sensor. The pump motor must be robust enough to handle the 24V supply and generate sufficient fluid pressure to spray fluid across the wide area of the truck’s windshield. This is the foundation of the Скруббер FAW J6P система.

The System Design Logic requires the pump to be positioned below the fluid level (often inside the tank itself) to ensure continuous operation, even when the fluid level is low. A failure in the pump or the reservoir neck seal will lead to fluid leakage and a non-functional Скруббер FAW J6P. Given the corrosive nature of some washer fluids, the materials used for this reservoir must be highly durable polymer plastic.

Основной 2: The “Удержание” Логика (Монтажное оборудование)

This group of hardware provides the necessary rigidity and security to anchor the fluid-filled Скруббер FAW J6P reservoir to the cab or chassis structure.

1. Компонент: ‘Hex flange lock nut’ (CQ32606) – Кол-во 3
Этот (Комп 2) is the primary locking nut. The Anti-Vibration Logic имеет решающее значение: this flange nut contains a mechanical feature (a lock flange or insert) that prevents it from vibrating loose. Since the reservoir is a heavy component subject to engine and road vibration, this locking nut is critical for maintaining the structural integrity of the Скруббер FAW J6P mounting.

2. Компонент: 'Зажим для ремня II’ (3724012-А01) – Кол-во 3
Этот (Комп 3) is a specialized clamp designed for securing the wiring harness and fluid lines near the reservoir. The Routing Security Logic ensures that the electrical wires and the fluid hoses leading from the Скруббер FAW J6P удерживаются прочно на месте, preventing them from chafing against sharp metal edges on the chassis.

3. Компонент: «Пластиковый ремешок’ (Т67414646) – Кол-во 4
Этот (Комп 4) is a heavy-duty cable tie. Four of these are used for secondary securement, further anchoring the hoses and harness in high-motion areas away from the immediate mounting point of the Скруббер FAW J6P.

Основной 3: The “Безопасность & Долговечность” Логика (Operational Lifespan)

This group addresses the longevity and resilience of the Скруббер FAW J6P system against the harsh operating environment of a heavy-duty dump truck.

1. Компонент: Environmental Sealing
The motor and tank assembly of the Скруббер FAW J6P are sealed against moisture and dust, which are prevalent on job sites. The material of the reservoir is designed to withstand extreme temperature cycling without cracking, ensuring reliability when the fluid is frozen or exposed to intense engine bay heat. This is central to the operational readiness of the Скруббер FAW J6P.

2. Компонент: Maintenance and Inspection
Proper serviceability of the Скруббер FAW J6P requires periodic inspection. Technicians must check the security of the mounting lock nuts (Комп 2) and the integrity of the hoses and electrical harness, paying close attention to the tie strap clamp locations (Комп 3, 4). Any sign of fluid leakage or wire chafing compromises the system and must be corrected immediately. The continued function of the Скруббер FAW J6P is essential for maintaining the driver’s critical visual field.

Скруббер FAW J6P: Полная разбивка на 4 части

В следующей таблице представлена ​​полная, подробная разбивка всех 4 типы компонентов в Скруббер FAW J6P сборка для FAW Jiefang CA3250P66K2L1T1E 6×4 самосвал. Этот список необходим для заказа запасных частей и выполнения полного обслуживания автомобиля. Скруббер FAW J6P.

Основные характеристики

Технические характеристики Скруббер FAW J6P определяются своей функцией как высокомоментный, electrically actuated system critical for maintaining driver visibility and safety.