

Welcome to this in-depth analysis of the Сборки первой и второй ступеней FAW с декоративными крышками (Сборка 705). Это полный, 18-тип компонента, “ingress/egress” система для FAW Jiefang CA4251P66K24T1A3E5 6×4 дизельный полуприцеп тягач. This is a primary driver safety and ergonomic assembly. Его “логика” is to provide a robust, non-slip, and multi-level “staircase” for safe cab access, while also serving as an aerodynamic and aesthetic body panel.
The Сборки первой и второй ступеней FAW с декоративными крышками system is a “двойная логика” дизайн. Its first “логика” is structural: a set of heavy-duty ‘Support Arm’ компоненты (5103225-91Вт, и т. д.) bolt directly to the cab’s ‘Welded Assembly’ (617) to provide a load-bearing foundation. Это второй “логика” is a modular, “жертвенный” дизайн. The ‘Step Panels’ (5103031-91Вт, и т. д.) and ‘Decorative Covers’ (5103021-91Вт, и т. д.) are individual, replaceable polymer parts.
Этот модульный “логика” is critical for reducing repair costs. This in-depth guide is an essential resource for collision repair specialists and parts managers. Мы разберем всю Сборки первой и второй ступеней FAW с декоративными крышками систему в свою 18 отдельные типы обслуживаемых компонентов. Мы проанализируем “структурная логика” принадлежащий 4 support arms, а “логика безопасности” of the step panels, а “aero logic” of the trim, and the 7-type “антивибрационный” система крепления.
Основа Сборки первой и второй ступеней FAW с декоративными крышками это его “скелет.” This is a set of four (4) massive, load-bearing support arms that act as the structural “шасси” для всей системы.
1. The “Логика” of the Main Arms (Компоненты 6 & 7):
The ‘Left/Right step panel support arm assy’ (5103225-91Вт / 5103230-91Вт) are the primary structural components. Их “логика” is to be the main load-bearing cantilevers.
These are not simple brackets; они сверхмощные, fabricated (сварной) steel assemblies, designed to withstand the entire weight of a driver (plus gear) bouncing on the steps. Этот “несущий” logic is critical for driver safety. These arms bolt directly to the ‘Welded Cab Assembly’ (617) structural frame and serve as the main, rigid foundation for the ‘Second-level step panel’ (Компонент 5).
2. The “Логика” of the Front Arms (Компоненты 8 & 9):
The ‘Left/Right step panel front support arm assy’ (5103325-91Вт / 5103330-91Вт) are the secondary structural components. Их “логика” является “stabilization.”
While the main arms (6 & 7) provide the primary vertical support, эти “передний” arms provide the “anti-twist” (крутильный) rigidity. Они создают “triangulated” support system, preventing the ‘First-level step panel’ (Компонент 3 & 4) from flexing, вибрирующий, или “flapping” на скоростях шоссе. Этот “антивибрационный” logic is key to the system’s longevity and “rattle-free” производительность.
These four arms form the complete “sub-frame” для Сборки первой и второй ступеней FAW с декоративными крышками. При столкновении, these are the primary serviceable parts that are inspected for bends or cracked welds.
This group of components is the “ориентированный на пользователя” часть Сборки первой и второй ступеней FAW с декоративными крышками. Это “staircase” for the driver.
Компоненты 3 & 4: ‘Left/Right first-level step panel’ (5103031-91Вт / 5103032-91Вт)
Компонент 5: ‘Second-level step panel’ (5103033-91Вт) – Кол-во 2
The “логика” из этих 3 части (итого 4 куски) является “Безопасность & Durability.” They are molded from a heavy-duty, high-impact, UV-stabilized polymer.
Non-Slip Logic: The “логика безопасности” is the aggressive, raised “tread” pattern on the surface. This is not for looks; it is an “anti-slip” дизайн. This tread is engineered to provide maximum boot grip, even when covered in mud, снег, лед, или дизельное топливо. Это #1 design feature for preventing driver slips and falls.
“Pass-Through” Логика: The tread is often an “open-grid” дизайн. Этот “логика” allows mud, снег, and gravel to “pass through” the step, rather than building up and creating a slippery hazard.
Modular Logic: The “логика” of this being three separate part numbers is “serviceability.” These panels are the highest-wear, highest-impact items. If a driver damages the ‘Left first-level step’, they only need to replace that single, “жертвенный” компонент, not the entire Сборки первой и второй ступеней FAW с декоративными крышками.
This group of MSUs from the Сборки первой и второй ступеней FAW с декоративными крышками provides the final “fit and finish.”
Компоненты 1 & 2: ‘Left/Right step panel decorative cover’ (5103021-91Вт / 5103022-91Вт)
Это “A-panels,” the main cosmetic “skins” that are visible from the side. Их “логика” is to hide the ‘Support Arms’ (6-9) и крепежные, providing a smooth, “автомобильного класса” заканчивать. Этот “aero logic” also reduces wind drag and noise.
Компоненты 10 & 11: ‘Step panel left/right upper trim’ (5103061-91Вт / 5103062-91Вт)
Это “отделка” логика. These trim pieces are the “прокладки” или “уплотнения” that “логика” is to bridge the gap between the ‘Step Panel’ (3-5) and the cab’s metal body. They provide a clean, finished edge and block “wind whistle” (ШВХ).
Эта последняя группа является “логика” of anti-vibration, essential for the Сборки первой и второй ступеней FAW с декоративными крышками. This system uses a massive 38-piece, 7-type fastener kit.
Компоненты 12, 13, 15, 16, 17 (‘Combination bolt’): The “логика” из этих 34 bolts is “anti-vibration.” They *all* have a pre-attached, captive *lock washer*. Этот “логика” обеспечивает постоянное напряжение, guaranteeing that the 4 structural arms and 4 step panels *cannot* vibrate loose.
Компонент 14 (‘Hexagon nut’): Эти 6 nuts are the “anchor logic,” used to secure the bolts that pass *through* the chassis frame.
Компонент 18 ('…винт, spring washer and plain washer assy’): This 2-piece set is the “polymer-safe” логика. Это “комбинация” screw *and* a “plain washer.” Этот “логика” is used to fasten the ‘Decorative Trim’ (10 & 11) to the plastic panels, using the washer to distribute the load and prevent cracking.
В следующей таблице представлена полная, подробная разбивка всех 18 типы компонентов, указанные в Сборки первой и второй ступеней FAW с декоративными крышками for the FAW CA4251P66K24T1A3E5 tractor.
| Отметка | Часть №. | Наименование | Количество |
|---|---|---|---|
| 1 | 5103021-91Вт | Left step panel decorative cover | 1 |
| 2 | 5103022-91Вт | Right step panel decorative cover | 1 |
| 3 | 5103031-91Вт | Left first-level step panel | 1 |
| 4 | 5103032-91Вт | Right first-level step panel | 1 |
| 5 | 5103033-91Вт | Second-level step panel | 2 |
| 6 | 5103225-91Вт | Left step panel support arm assy | 1 |
| 7 | 5103230-91Вт | Right step panel support arm assy | 1 |
| 8 | 5103325-91Вт | Left step panel front support arm assy | 1 |
| 9 | 5103330-91Вт | Right step panel front support arm assy | 1 |
| 10 | 5103061-91Вт | Step panel left upper trim | 1 |
| 11 | 5103062-91Вт | Step panel right upper trim | 1 |
| 12 | CQ1460825F6B | Комбинированный болт | 16 |
| 13 | CQ1461045 | Комбинированный болт | 6 |
| 14 | CQ34010 | Шестигранная гайка | 6 |
| 15 | CQ1460820 | Комбинированный болт | 4 |
| 16 | CQ1460820F6B | Комбинированный болт | 4 |
| 17 | CQ1460845F6B | Комбинированный болт | 4 |
| 18 | Q2360620F6B | Поперечный встроенный поддон винт, spring washer and plain washer assy | 2 |
Технические характеристики Сборки первой и второй ступеней FAW с декоративными крышками are defined by its function as a multi-component, структурный, and ergonomic driver access system.
| Приложение для автомобиля | FAW Цзефан CA4251P66K24T1A3E5 6×4 Трактор |
| Группа компонентов | Сборки первой и второй ступеней FAW с декоративными крышками |
| Тип системы | Modular Cab Access Step & Trim System |
| Первичная логика | Безопасность водителя (3-Точка контакта, Non-Slip) |
| Вторичная логика | Структурная поддержка, Aerodynamic Fairing, ШВХ (Анти-погремушка) |
| Компонент 1 (Рамка) | 4x Welded Steel Support Arms (Слева/справа, Main/Front) |
| Компонент 2 (Steps) | 4x Polymer Step Panels (Уровень 1 Л/П, Уровень 2 x2) |
| Компонент 3 (Подрезать) | 4x Polymer Decorative Covers/Trims (Л/П) |
| Система крепления | 38-Кусок, 7-Type Anti-Vibration Kit (Комбинированные болты, Орехи) |
| Удобство обслуживания | Высокий: Все 18 component types are individual serviceable parts. |
Запчасти ФАВ, включая блок цилиндров в сборе, тщательно упакованы, чтобы обеспечить безопасную доставку. Каждый компонент закреплен защитными материалами для предотвращения повреждений при транспортировке.. Логистическая сеть гарантирует своевременную доставку по всему миру., поддержка эффективных операций по техническому обслуживанию. Ниже приведено изображение, иллюстрирующее стандартную упаковку запчастей для грузовиков FAW., демонстрация внимания к деталям в обращении и хранении.
Такой подход к упаковке сводит к минимуму риск коррозии или ударного повреждения., обеспечение доставки таких деталей, как блок цилиндров FAW в сборе, в идеальном состоянии.. Клиенты могут положиться на логистику FAW для обеспечения стабильного качества и надежности..