مجموعة بطارية FAW ودعامة التثبيت: تفكيك 13 المكونات الحاسمة لقوة موثوقة

مرحبًا بك في هذا الدليل الفني المهم حول مجموعة بطارية FAW ودعامة التثبيت (حَشد 556). هذا هو الكامل, chassis-mounted electrical power supply and housing system for the FAW Jiefang CA4251P66K24T1A3E5 6×4 جرار نصف مقطورة ديزل. هذا التجمع هو “قلب” of the truck’s entire electrical system, providing the power for starting, إضاءة, and all onboard electronics.

ال مجموعة بطارية FAW ودعامة التثبيت هو “منطق” system designed for maximum durability and safety. وظيفتها ذات شقين: أولاً, it securely houses the two ‘Battery assembly’ (3703010-1086) وحدات, protecting them from extreme vibration, حطام الطريق, والطقس. ثانية, إنه “منطق” provides a robust, vibration-proof fastening system to ensure these heavy components never break loose.

يعد هذا الدليل المتعمق موردًا أساسيًا للفنيين المحترفين ومديري الأساطيل. سنقوم بتفكيك الكل مجموعة بطارية FAW ودعامة التثبيت فيه 13 مكونات صالحة للخدمة, including the main batteries, the ‘Battery press plate assy’ (3703160-92دبليو), the internal ‘Baffles’ and ‘Separators’, and the critical high-tensile fasteners that lock the system together.

المكون الأساسي 1: The ‘Battery Assembly’ (3703010-1086)

جوهر “قوة” component of this assembly is the ‘Battery assembly’ (3703010-1086). قائمة الأجزاء تدعو إلى اثنين من هذه. هذا هو “منطق” of a heavy-duty 24-volt electrical system. Passenger cars use a 12-volt system, but a high-compression diesel engine requires a much more powerful starter motor to turn over.

لتحقيق هذا, ال مجموعة بطارية FAW ودعامة التثبيت holds two 12-volt, high-cranking-amp (CCA) البطاريات. These batteries are then connected **in series** (the positive of one battery connects to the negative of the other). هذا “منطق” doubles the voltage from 12V to 24V, providing the immense power needed for the starter motor. This 24V system also allows for the use of smaller-gauge (and thus lighter) wiring throughout the truck, which is a significant advantage in a large vehicle.

These are not standard car batteries; هم كذلك “الثقيلة” البطاريات, specifically engineered with reinforced internal plates and separators to withstand the constant, high-frequency vibration of a diesel engine and the severe jolts of a tractor’s suspension. A failure of one of these batteries will prevent the truck from starting.

المكون الأساسي 2: ال “قوس التثبيت” منطق

ال “قوس التثبيت” جزء من مجموعة بطارية FAW ودعامة التثبيت هو كامل “نظام” of plates and baffles designed for total immobilization. A 30kg battery becoming a projectile in a collision or on a rough road is a catastrophic failure. هذا التجمع “منطق” is to prevent that at all costs.

يشمل هذا النظام:

• **’Battery press plate assy’ (3703160-92دبليو) & ‘Battery upper press plate’ (3703161-92دبليو):** هذا هو الشيء الرئيسي “غطاء” أو “المشبك” that presses down on the *top* of the batteries. This provides the primary vertical securement.
• **’Battery baffle’ (3703162-92دبليو) & ‘Battery lower baffle’ (3703163-92دبليو):** These are the vertical and horizontal “walls” of the battery box.
• **’Battery separator’ (3703164-92دبليو):** This is a critical internal plate that sits *between* the two batteries. إنه “منطق” is to prevent the two batteries from rubbing or slamming into each other during cornering, which could crack their cases and cause a hazardous acid spill.

This entire cage-like structure is made from heavy-gauge, corrosion-resistant steel, as it must be able to withstand potential battery acid leaks. This robust “exoskeleton” هو جوهر “منطق” التابع مجموعة بطارية FAW ودعامة التثبيت.

المكون الأساسي 3: ال “Fail-Safe” نظام السحابة

ال مجموعة بطارية FAW ودعامة التثبيت is held together by a redundant, “آمنة من الفشل” system of high-tensile fasteners. هذا “منطق” is designed to be serviceable, yet immune to vibration.

**’Welded single-head stud’ (01100820) – 4 وحدات:** These are the foundation. These studs are permanently welded to the truck’s main chassis frame rail. The entire bracket assembly is “hung” from these four studs.

**’Battery fastening bolt’ (3703163-242 & -40أ) – 6 units total:** هذه هي “J-hooks” أو “tie-down” البراغي. هُم “منطق” is to hook into the bottom of the battery tray and pass up *through* the ‘Battery upper press plate’ (3703161-92دبليو).

**’Hex head flange lock nut’ (CQ32606) – 10 وحدات:** This is the most critical fastener “منطق” من الجمعية. These nuts are used to tighten the “J-hooks” تحت, clamping the batteries. ال “شفة” (غسالة متكاملة) provides a wide clamping surface. ال “قفل الجوز” (عزم الدوران السائد) design means the nut *cannot* vibrate loose. This ensures the batteries remain clamped, even after years of service.

**’Cross recessed pan head screw’ (Q2140614) – 10 وحدات:** These smaller screws, paired with ‘Gaskets’ (Q40108) و "جوانات الربيع".’ (س40308), are used to secure the ‘Battery press plate assy’ (the main cover) to the side baffles. ال “spring gasket” (غسالة القفل) is another anti-vibration “منطق” عنصر, ensuring every part of the مجموعة بطارية FAW ودعامة التثبيت is secure.

FAW Battery And Mounting Bracket Assembly Parts List

الجدول التالي يوفر كامل, تفصيل مفصل للجميع 13 component types identified in the ‘Battery And Mounting Bracket Assembly’ (556) رسم تخطيطي للجرار FAW CA4251P66K24T1A3E5.

المواصفات الفنية وسياق التجميع

المواصفات ل مجموعة بطارية FAW ودعامة التثبيت يتم تعريفها من خلال وظيفتها باعتبارها الثقيلة, مقاوم للاهتزاز, 24V power supply module. This assembly is a critical component for vehicle operation and safety.