Экспертное руководство: FAW Logic Assembly For The Valve Train for the CA4251P66K24T1A3E5 Tractor

Welcome to this expert technical guide on the FAW Logic Assembly For The Valve Train, the complete “top-end” actuation system for the FAW Jiefang CA4251P66K24T1A3E5 6×4 diesel semi-trailer tractor. This is the most complex assembly of moving parts in the engine.

The FAW Logic Assembly For The Valve Train (или “valvetrain”) contains every component responsible for translating the camshaft’s rotation into the precise opening and closing of all 24 engine valves. This system’s “logic” dictates the engine’s entire breathing and braking performance.

This guide is an essential resource for professional engine rebuilders, machine shops, and technicians. We will deconstruct the entire FAW Logic Assembly For The Valve Train, including every rocker arm, valve, весна, seat, seal, bridge, and solenoid, breaking it down to its smallest serviceable unit.

The Rocker Arm Assemblies and Blocks

The core of the actuation system within the FAW Logic Assembly For The Valve Train is the rocker arm set. The parts list details an ‘Intake rocker arm assembly’ (1007110-51Б) and an ‘Exhaust rocker arm assembly’ (1007120-51Б), with six of each for the six-cylinder engine. These are the levers that the camshaft lobes act upon.

These are not simple levers; they are complex assemblies, likely featuring a roller-follower at the point of contact with the cam to reduce friction and wear. This roller is a high-wear item, and its integrity is key to the health of the FAW Logic Assembly For The Valve Train. The other end of the arm is designed to press on the valve bridge, actuating two valves at once.

The rocker arms are supported by a shaft that is held in place by a series of ‘Rocker arm blocks’. The parts list shows a very specific set: ‘Rocker arm block (один)’ (1007181-81Д), ‘Rocker arm block (два)’ (1007182-51Б), ‘Rocker arm block (один, два, три)’ (1007165-51Б), ‘Rocker arm block (три)’ (1007183-51Б), and ‘Rocker arm block (четыре, пять, шесть)’ (1007175-51Б). This highly specific, non-interchangeable set of blocks forms the bearing saddles for the rocker arm shaft, ensuring its perfect alignment over the cylinder head. These blocks, along with the ‘Rocker arm shaft locating sleeve’ (1007163-51Б), are fundamental to the rigid structure of the FAW Logic Assembly For The Valve Train.

The 4-Valve Actuation: Bridges and Tappets

This engine uses a four-valve-per-cylinder design (two intake, two exhaust), but only has a single camshaft. The “logic” that allows one rocker arm to actuate two valves is the “valve bridge.” The FAW Logic Assembly For The Valve Train includes six ‘Intake valve bridge’ (1007012-81Д) and six ‘Exhaust valve bridge assembly’ (1007015-81Д) единицы.

A valve bridge (or yoke) is a small, precise T-shaped component that sits on top of the two valve stems for a single port (НАПРИМЕР., the two intake valves). The rocker arm presses on the center of the bridge, which then transfers this force evenly to both valves, pushing them open in perfect synchrony. The ‘Exhaust valve bridge assembly’ is likely more complex, possibly containing a mechanism related to the engine brake.

The parts list also includes 48 ‘Valve block’ (1007028-53Д) единицы. This quantity (48 = 24 valves x 2) is initially confusing. Однако, these are likely the hardened steel “толкатели” или “caps” that sit on the very tip of the valve stems. The valve bridge’s adjuster screws press on these tappets, not the valve stem itself. This provides a durable, replaceable wear surface, protecting the valve stem. The proper function of these small components is essential for the entire FAW Logic Assembly For The Valve Train to operate correctly.

Solenoid Valve (1007164-51Б): The Engine Brake Logic

A key feature of this FAW Logic Assembly For The Valve Train is the ‘Solenoid valve’ (1007164-51Б), of which there are two. In a heavy-duty diesel, a solenoid in the valvetrain almost invariably controls the engine brake (НАПРИМЕР., а “Jake Brake”). This solenoid is an electronically controlled valve that manages the flow of high-pressure engine oil.

When the driver activates the engine brake, this solenoid opens, directing oil to a special hydraulic circuit within the FAW Logic Assembly For The Valve Train (likely integrated into the rocker arms or exhaust bridges). This hydraulic pressure overcomes the valve spring and forces the exhaust valves to open at the *top* of the compression stroke, right *before* the fuel injection stroke.

This action releases the highly compressed air (над 500 PSI) from the cylinder, dissipating the energy as noise (the classic “Jake Brake” sound) instead of pushing the piston back down. The engine is effectively turned into a giant, power-absorbing air compressor, which provides significant braking force without using the service brakes. This solenoid is the electronic “brain” of the braking side of the FAW Logic Assembly For The Valve Train. It is protected by a ‘Solenoid valve cover assembly’ (1007160-51Б) and sealed with ‘Copper gaskets’ (Q/WC3403-94(8X14)).

The Complete Valve & Spring System

Этот FAW Logic Assembly For The Valve Train list is a complete kit, as it includes the valves themselves: 12 ‘Intake valve’ (1007011-81Д) и 12 ‘Exhaust valve’ (1007016-81Д). The intake valve has a larger head to maximize airflow *in*, while the exhaust valve has a smaller head and is made of a superior high-temperature alloy (like Inconel or a sodium-filled stem) to survive the 700°C+ exhaust gases.

These valves are sealed against the head by the ‘Intake valve seat’ (1003012-81Д) and ‘Exhaust valve seat’ (1003013-81Д). These hardened steel rings are pressed into the cylinder head and are the replaceable “wear surface” that the valve seals against. This entire FAW Logic Assembly For The Valve Train is designed to be fully serviceable.

The valves are kept closed by a complex set of springs. The list shows ‘Intake valve spring’ (1007021-81Д) and ‘Exhaust valve inner spring’ (1007023-81Д). This is a critical detail. The exhaust valve likely uses *two* springs (an inner and an outer, though the outer isn’t listed here) for added pressure. This dual-spring setup is crucial to prevent “valve float” on the exhaust side, where high-RPM exhaust pulses can literally “blow” the valve open, destroying the timing. These springs sit on the ‘Valve spring seat’ (1007024-81Д), a hardened washer that protects the aluminum head.

Critical Seals: Valve Guide and Oil Seal (1007035-81Д)

Two components in this FAW Logic Assembly For The Valve Train list are responsible for sealing the valve stems. First, the ‘Valve guide’ (1003014-81Д), of which there are 24, is the bronze or iron sleeve pressed into the head. The valve stem slides up and down inside this guide. This component maintains the valve’s alignment and transfers heat from the stem to the water-cooled head.

Second, and most critically for oil consumption, is the ‘Valve guide oil seal assembly’ (1007035-81Д), с 24 единицы. This is a small, “umbrella-shaped” seal, typically made of high-temperature Viton. It clips onto the top of the valve guide. Its purpose is to prevent the “bath” of oil splashing around the rocker arms from being sucked down the valve guide (between the guide and the fast-moving stem) and into the combustion chamber.

Worn valve stem seals are the number one cause of high oil consumption and blue smoke on engine startup. Replacing these 24 seals is a mandatory step in any professional rebuild of the FAW Logic Assembly For The Valve Train to ensure a smoke-free, эффективный, and emissions-compliant engine. The entire FAW Logic Assembly For The Valve Train depends on these small seals.

FAW Logic Assembly For The Valve Train Parts List

The following table provides the complete, detailed breakdown of all components identified in the ‘Logic Assembly For The Valve Train’ diagram for the FAW CA4251P66K24T1A3E5 tractor. This is the complete parts group for a full top-end valvetrain service of the FAW Logic Assembly For The Valve Train.

Technical Specifications and Assembly Context

The specifications for the FAW Logic Assembly For The Valve Train are defined by its function as the complete 24-valve actuation and engine braking system. The entire FAW Logic Assembly For The Valve Train is a precision-engineered system.