Línea de freno FAW: Deconstruyendo el 56 Componentes críticos que garantizan su seguridad

Bienvenido a esta guía técnica crítica sobre la Línea de freno FAW sistema (Asamblea 539). este es el completo, multi-circuit, high-pressure pneumatic braking and control system for the FAW Jiefang CA4251P66K24T1A3E5 6×4 tractor semirremolque diésel. This assembly is arguably the most critical safety system on the entire vehicle.

El Línea de freno FAW is not a single part, but a complex “lógica” network of valves, mangueras, tubería, sensores, and brackets. Its function is to take the compressed air from the air compressor and distribute it on demand to the service brakes (foot pedal), parking brakes (hand valve), and trailer brake circuits. Este “air-over-mechanical” logic provides the immense stopping power required for a fully-loaded tractor-trailer.

This in-depth guide is an essential resource for professional chassis technicians and parts specialists. Deconstruiremos todo Línea de freno FAW sistema en su 56 componentes reparables, including the ‘Air dryer’ (3511020-81W-C00), ‘Air processing unit’ (3515020-81W-C00), ‘ABS solenoid valve’ (3550310-50A), and all the critical hoses, guarniciones, and brackets that make the system function.

El “Logic” of a Pneumatic FAW Brake Line

El Línea de freno FAW system is pneumatic (air-powered), not hydraulic like a passenger car. This is a critical design “lógica” for heavy-duty trucks. Primero, air pressure provides far more stopping force than hydraulic pressure can, which is essential for a 40-ton vehicle. Segundo, the system is “fail-safe.” A hydraulic leak results in total brake failure. A leak in a pneumatic Línea de freno FAW will cause the spring-brakes (parking brakes) to automatically engage, safely stopping the truck.

This logic is managed by two core components:

• **’Air dryer assembly’ (3511020-81W-C00):** Este es el “lung” del Línea de freno FAW. It takes hot, wet air from the compressor and “dries” it by passing it through a desiccant filter. This is a critical first step, as any moisture in the system would freeze in cold weather, blocking the valves and causing total brake failure.
• **’Air processing unit (APU)’ (3515020-81W-C00):** Este es el “brain.” It is a central distribution manifold. It takes the clean, dry air and splits it into multiple, redundant circuits (P.EJ., front brakes, rear brakes, trailer brakes, parking brake). This ensures that a failure in one Línea de freno FAW circuit (like a blown hose) will not cause a total loss of stopping power.

El “Electronic Logic”: ABS and Solenoids

The modern Línea de freno FAW system is not just pneumatic; it is electro-pneumatic. The ‘Anti-lock brake solenoid valve assembly’ (3550310-50A) is the electronic interface. This valve block receives high-speed commands (hundreds of times per second) from the truck’s ABS computer.

When the driver panic-stops and a wheel begins to lock up (as detected by the wheel speed sensors), the ABS computer instantly commands this solenoid. The solenoid then rapidly “zapatillas” the air pressure to that specific wheel’s brake chamber, releasing and reapplying the brake much faster than any human could. Este es el “antibloqueo” logic that allows the driver to maintain steering control during a panic stop.

This system also includes the ‘Hand brake valve with protective cover assy’ (3508015-91W-C00) and ‘Foot brake valve & clutch plate assy’ (3504020-91W.). These are the driver’s primary inputs, translating foot and hand movement into proportional air pressure signals. El Línea de freno FAW is a complex integration of mechanical, pneumatic, and electronic logic.

El “Lines”: Manguera, Pipes, and Bundles

El “Line” part of the Línea de freno FAW keyword refers to the physical “arteries” that carry the compressed air. This is a combination of rigid pipes and flexible hoses.

**Manguera:** The ‘Brake flexible hose-front brake’ (3506030-60A & 3506040-1051) and ‘Control flexible hose-front brake’ (3506040-1051) are used at the “wheel ends.” This is a critical “lógica” choice, as these flexible, wire-braided hoses must be able to withstand 120+ PSI of pressure while constantly flexing and turning with the front steering wheels. A cracked or abraded hose is a common failure point in any Línea de freno FAW sistema.

**Pipes & Bundles:** The ‘Front air pipe assy’ (3506205-91W.), ‘Pipe bundle assy’ (3506100-92W.), and ‘Air compressor air pipe assy’ (3506210A91W) are the main rigid lines. These are typically pre-bent nylon or steel tubes that run along the chassis frame. They are bundled together for protection and ease of installation. A “bundle” is a key part of the Línea de freno FAW lógica, as it keeps the critical, color-coded lines organized and protected from road debris.

Brackets, Fittings, and Support Structure

A Línea de freno FAW system is under constant vibration. Es “lógica” requires that it be rigidly mounted to the chassis to prevent fatigue and failure. This parts list details an extensive support system:

• ‘Front pipe bundle bracket’ (3506038-91W., 3506430-91W.)
• ‘Bracket-hand brake valve’ (3522012-91W.)
• ‘Bracket-air processing unit’ (3515021-91W.)
• ‘Transition bracket-air storage module’ (3513824-91W.)
• ‘Main wiring harness bracket’ (3724426-68V) (shared bracket)

The ‘Fittings’ are the dozens of small, but critical, conectores. This includes ‘Grommets’ (3506204-50A), ‘Multi-way joints’ (3506404-50A), ‘Plugs’ (3506407-1500), and numerous ‘Sealing rings’ (3515416-81W-C00, 3513403-1500, 3506413-1500, etc.). Each one of these is a potential leak point. El “lógica” del Línea de freno FAW is to use high-quality, O-ring-sealed (grommet-type) fittings to ensure a leak-free system. A leaking fitting is a critical, “vehicle-down” failure.

todo el Línea de freno FAW is fastened with hundreds of high-tensile, vibration-resistant fasteners, including ‘Hex flange bolts’ (Q1841445T) and ‘Hex head flange lock nuts’ (CQ32614), to ensure total system integrity.

FAW Brake Line Parts List (1/2)

The following table provides the first part of the detailed breakdown for the Línea de freno FAW (539) diagrama para el tractor FAW CA4251P66K24T1A3E5.

FAW Brake Line Parts List (2/2)

This table details the remaining components for the Línea de freno FAW (539) diagrama.

Especificaciones técnicas y contexto de montaje.

Las especificaciones para el Línea de freno FAW system are defined by its function as a complete, multi-circuit, high-pressure pneumatic system. El Línea de freno FAW is a safety-critical system for vehicle control.