La vista ampliada y ampliada: Compresor de aire FAW para el tractor CA4251P66K24T1A3E5

Welcome to the comprehensive technical guide for the Compresor de aire FAW (Número de pieza. 3509010-91W.), a critical safety component on the FAW Jiefang CA4251P66K24T1A3E5 6×4 diesel semi-trailer tractor. This assembly is the heart of the vehicle’s pneumatic system.

In a heavy-duty tractor, the air compressor does more than just power accessories; it is the source of stopping power for the air brake system, a key component for the air-ride suspension, and the power behind the air-actuated gearbox components. The reliability of the Compresor de aire FAW es, therefore, non-negotiable.

This guide is designed for professional technicians, maintenance managers, and parts specialists. We will deconstruct the entire Compresor de aire FAW mounting and drive assembly into its smallest serviceable units, including the main assembly, its drive gear, critical seals, and mounting fasteners.

Core Component: Conjunto de compresor de aire (3509010-91W.)

The main component in this diagram is the ‘Air Compressor Assembly’ (3509010-91W.). This is the parent unit that is typically replaced as a complete assembly during a major failure. This is not a simple, belt-driven accessory; it is a heavy-duty, engine-integrated pump. On this FAW model, el Compresor de aire FAW is a reciprocating piston-type pump, likely a robust single-cylinder or twin-cylinder design, engineered for high-volume, continuous-duty operation.

Its operation is fundamental. It draws in filtered air, compresses it to a high pressure (typically over 120 PSI), and then delivers it to an air governor, which in turn fills the vehicle’s primary and secondary air tanks. This assembly is designed to be both liquid-cooled and pressure-lubricated. This means it has internal passages that connect directly to the engine’s cooling and oil systems, which is why the associated seals are so critical.

The head of the Compresor de aire FAW contains a set of reed valves or poppet valves for intake and exhaust, which are precision-engineered to handle the high temperatures and pressures. Con el tiempo, carbon buildup or mechanical wear can cause these valves to leak, leading to a drop in efficiency, slow air buildup, or the compressor “passing oil” into the air system. When such a failure is diagnosed, replacing the entire Compresor de aire FAW assembly is often the most reliable and time-efficient repair.

Sistema de manejo: Air Compressor Driven Gear (1006047-81D)

Unlike on a passenger car, el Compresor de aire FAW is not driven by a rubber belt. The power required to generate that much compressed air is substantial, and the reliability standard is much higher. This assembly is gear-driven, directly from the engine’s internal timing gear train. The ‘Air Compressor Driven Gear’ (1006047-81D) is the key component for this power transfer.

This gear is a heavy-duty, hardened steel component, precisely machined with helical-cut teeth. These helical teeth mesh with a drive gear inside the engine’s timing case, providing a positive, high-torque, slip-proof connection. This gear-driven design is exceptionally reliable and maintenance-free compared to a belt, but it also means its installation is more complex.

This gear is pressed or bolted onto the compressor’s own crankshaft. When installing a new Compresor de aire FAW, this gear must be transferred, or a new one installed. The condition of this gear is critical; any chipping or excessive wear on the teeth can introduce metal debris into the engine’s timing case, leading to catastrophic engine failure. It is a vital serviceable component, representing the single point of power input for the entire pneumatic system.

The Critical Seal: junta tórica (Q734B15000265)

The parts list identifies a single ‘O-ring Seal’ (Q734B15000265). It is impossible to overstate the importance of this one, small component. This seal is the primary interface between the Compresor de aire FAW and the engine block. Given that the compressor is liquid-cooled and pressure-lubricated, this O-ring is a multi-function seal of critical importance.

This single o-ring is responsible for sealing multiple passages simultaneously as the compressor is bolted to the engine.

1. Oil Sealing: El Compresor de aire FAW requires a constant supply of high-pressure engine oil to lubricate its crankshaft, connecting rod bearing, and piston. This o-ring seals the oil feed passage from the engine block to the compressor’s oil inlet. If this seal fails, the compressor will be starved of oil and will seize in minutes, or it will create a massive external oil leak.
2. Coolant Sealing: Compressing air generates an immense amount of heat. To prevent overheating, el Compresor de aire FAW has a water jacket that is part of the engine’s cooling system. This o-ring seals the coolant passage, preventing external coolant leaks and, more importantly, preventing coolant from entering the oil system.
3. Air/Crankcase Sealing: The seal also prevents compressed air (from a potential internal leak) or crankcase pressure from escaping at the mounting flange.

This o-ring is made of a special, high-temperature, oil-resistant material (like Viton) designed to withstand the harsh environment of a diesel engine. It is a “one-time-use” parte. Whenever the Compresor de aire FAW is removed for any reason, this seal *must* be replaced. Re-using an old, compressed, or heat-hardened o-ring is a guarantee for a leak. This single part, though costing very little, is essential for a reliable repair.

Fasteners: Hex Flange Bolts (Q1841035, Q1841025)

The final components on the list are the fasteners that physically secure the Compresor de aire FAW to the engine’s gear case. The list calls for two different part numbers: four units of ‘Hex Flange Bolt, Coarse Rod (Tipo estándar)’ (Q1841035) and one unit of (Q1841025). Este 4+1 pattern is typical for mounting heavy, high-vibration accessories.

The four Q1841035 bolts are likely the main mounting bolts, while the single Q1841025 bolt is likely a different length, perhaps used for a location with a different flange thickness or for attaching a support bracket. These are not standard hardware-store bolts. They are ‘Flange Bolts’, which means the head has an integrated washer. This design distributes the clamping force over a wider area, preventing the bolt head from digging into the aluminum or cast-iron compressor flange and creating a secure, vibration-resistant joint.

These are also ‘Standard Type’ coarse rod bolts, indicating a specific (and likely high) tensile strength (P.EJ., Class 8.8 o 10.9) designed to handle the constant, hammering vibration of both the diesel engine and the reciprocating compressor. Using the correct, factory-specified bolts and tightening them to the precise torque specification is the only way to ensure the heavy Compresor de aire FAW does not vibrate loose or crack its mounting flange.

FAW Air Compressor Assembly Parts List

The following table provides the detailed breakdown of components for the Compresor de aire FAW and its mounting, as specified for the FAW CA4251P66K24T1A3E5 tractor.

Technical Specifications and Assembly Context

The specifications for the Compresor de aire FAW are defined by its critical role as a safety component. The system is designed for high reliability and direct integration with the engine.