- Ville de ChangChun, Province du Jilin, Chine
par 
Welcome to this comprehensive technical guide on the FAW Auxiliary Cylinder Assembly. This is the complete pneumatic “muscle” et “logic” system that actuates the high/low range splitter for the auxiliary “sub-box” of the FAW Jiefang CA4251P66K24T1A3E5 6×4 diesel semi-trailer tractor.
Le FAW Auxiliary Cylinder Assembly is the component that physically moves the synchronizer fork to shift the transmission from its “faible” range (for pulling heavy loads) to its “haut” range (for highway cruising). It is powered by the truck’s main compressed air system and controlled by an electronic solenoid.
This in-depth guide is a critical resource for professional transmission technicians and fleet managers. We will deconstruct the entire FAW Auxiliary Cylinder Assembly into its 8 serviceable components, including the main cylinder and shaft, the shift fork, the air fittings, and the critical locking hardware.
The heart of the FAW Auxiliary Cylinder Assembly is the ‘Cylinder assembly-sub box’ (1701640-A2V). This is the main pneumatic actuator. This component is a high-reliability air cylinder, typically mounted to the side of the transmission’s rear housing.
Its “logic” is simple but powerful. The cylinder contains an internal piston and a robust seal. When the driver flips the “range selector” switch in the cab, an electronic solenoid (a separate part) directs high-pressure air (100+ PSI) from the truck’s main air system into one of the ’90-degree elbow joint assembly-cylinder’ (1701755-A8L) ports.
This blast of air slams the piston forward, moving the ‘Cylinder fork shaft assembly’ (1701640Aa9p, a sub-part) that is attached to it. When the driver selects the other range, the solenoid vents the air from the first port and pressurizes the second port, slamming the piston and shaft in the opposite direction. This pneumatic “muscle” provides the several hundred pounds of force required to move the shift fork.
A failure of the internal piston seal in this FAW Auxiliary Cylinder Assembly will cause an air leak. This leak is critical: it not only prevents the transmission from shifting ranges but also creates a parasitic drain on the truck’s main air brake system, which is a major safety hazard. The reliability of the FAW Auxiliary Cylinder Assembly is therefore paramount.
The ‘Fork – sub-box synchronizer’ (1701632-A2V) is the mechanical link between the air cylinder and the gearbox internals. This component of the FAW Auxiliary Cylinder Assembly is a heavy-duty, forged steel “yoke.”
It is attached to the end of the pneumatic ‘Cylinder fork shaft’ (1701640-A2V). The two “tines” of the fork ride in a deep groove on the “sliding sleeve” of the sub-box output shaft’s synchronizer (see Assembly 149). When the air cylinder moves the shaft, this fork moves with it, physically sliding the synchronizer hub to engage either the high-range or low-range gear set.
This fork is a high-wear, high-stress component. Le “coussinets” on the end of the fork tines are in constant, light contact with the spinning synchronizer sleeve. Over hundreds of thousands of shifts, these pads can wear down. Excessive wear will cause a “sloppy” shift, incomplete gear engagement, ou “popping out” of range. A cracked fork is a critical failure of the FAW Auxiliary Cylinder Assembly.
Le FAW Auxiliary Cylinder Assembly is powered by air, requiring a leak-free plumbing system. The two ’90-degree elbow joint assembly-cylinder’ (1701755-A8L) fittings are the “inlet” et “outlet” ports for the air cylinder.
These are high-pressure, threaded fittings that allow the air lines to be connected at a 90-degree angle, which is essential for routing hoses in the tight confines of the transmission tunnel.
The ‘Terminal-type pipe joint – tapered pipe connection’ (C063005) is the main “supply” fitting. It is likely where the main air-feed line from the solenoid block connects to the rigid piping of the FAW Auxiliary Cylinder Assembly.
A leak in any of these high-pressure fittings is a major fault. It will cause the FAW Auxiliary Cylinder Assembly to be weak or unresponsive. More importantly, it creates a parasitic leak on the main brake system, forcing the engine’s air compressor to run constantly, which is a major safety concern.
The mounting hardware for the FAW Auxiliary Cylinder Assembly is designed for maximum security in a high-vibration environment. The ‘Hex flange bolts’ (Q1841040) and ‘Spring gaskets’ (Q40310) are used to secure the main cylinder body to the transmission housing. The flange head and spring washer work together to provide a high-clamping force that resists vibration.
Cependant, the most critical fasteners in this FAW Auxiliary Cylinder Assembly are the ‘Hex head bolt with hole’ (1701633-A7G) unités. The list calls for two. These are used for a “cannot-fail” connection, almost certainly to attach the ‘Fork’ (1701632-A2V) to the ‘Cylinder fork shaft’.
These bolts have a hole drilled through their heads. This is for the ‘Steel locking wire’ (1701578-A2K). This is a critical safety “logic.” After the technician torques these bolts to the correct specification, this steel wire is threaded through the holes in both bolt heads and then twisted taut.
Ce “lock wire” makes it physically impossible for the bolts to rotate or back out from vibration. If these bolts came loose, the shift fork would detach from the cylinder, and the driver would be permanently stuck in whatever range they were in (either high or low). A missing lock wire is a sign of an incomplete repair and a critical safety risk. This entire hardware set is essential to the function of the FAW Auxiliary Cylinder Assembly.
The following table provides the complete, detailed breakdown of all 8 components identified in the ‘Auxiliary Cylinder Assembly’ diagram for the FAW CA4251P66K24T1A3E5 tractor. Le FAW Auxiliary Cylinder Assembly is the “muscle” for the transmission’s range selector.
| Mark | Partie no. | Nom de la pièce | Quantité |
|---|---|---|---|
| 1 | 1701632-A2V | Fork – sub-box synchronizer | 1 |
| 2 | 1701640-A2V | Cylinder assembly-sub box | 1 |
| 3 | 1701755-A8L | 90-assemblage de joint de coude à degré-cylindre | 2 |
| 4 | Q40310 | Spring gasket | 4 |
| 5 | Q1841040 | Hex flange bolt, coarse rod (Modèle standard) | 4 |
| 6 | 1701633-A7G | Hex head bolt with hole | 2 |
| 7 | 1701578-A2K | Steel locking wire | 1 |
| 8 | C063005 | Terminal-type pipe joint – tapered pipe connection | 1 |
The specifications for the FAW Auxiliary Cylinder Assembly are defined by its function as a high-force, pneumatic actuator for the transmission’s range selector. Le FAW Auxiliary Cylinder Assembly is a safety-critical part.
| Vehicle Application | FAW Jiefang CA4251P66K24T1A3E5 6×4 Tracteur |
| Component Group | FAW Auxiliary Cylinder Assembly |
| Actuation Type | Pneumatic (Compressed Air) |
| Control System | ECU-Controlled Solenoid Valve (External) |
| Main Cylinder Assembly | 1x (Partie no. 1701640-A2V) |
| Mechanical Linkage | 1x Shift Fork (1701632-A2V) |
| Air Ports | 2x 90-Degree Elbow Joints (1701755-A8L) |
| Safety Feature | 1x Steel Locking Wire (1701578-A2K) |
| Critical Fasteners | 2x Bolts with Hole (1701633-A7G) |
| Primary Function | Provides the physical force to shift the transmission’s auxiliary “sub-box” between High and Low range. |
FAW parts, including the Cylinder Block Assembly, are packaged with care to ensure safe delivery. Each component is secured in protective materials to prevent damage during transit. The logistics network guarantees timely shipments worldwide, supporting efficient maintenance operations. Below is an image illustrating the standard packaging for FAW truck parts, showcasing the attention to detail in handling and storage.
This packaging approach minimizes the risk of corrosion or impact damage, ensuring that parts like the FAW Cylinder Block Assembly arrive in perfect condition. Customers can rely on FAW’s logistics for consistent quality and reliability.
FAW est l’un des constructeurs automobiles les plus anciens et les plus importants de Chine., avec un capital social de RMB 35.4 milliards de yuans et actif total en RMB 457.83 milliards de yuans.
CHINE FAW GROUP CO., LTD. (abréviation de FAW), anciennement China First Automobile Works, peut retracer ses racines jusqu'à juillet 15, 1953, lorsque sa première usine d'assemblage a commencé à être construite. FAW est l’un des constructeurs automobiles les plus anciens et les plus importants de Chine., avec un capital social de RMB 35.4 milliards de yuans et actif total en RMB 457.83 milliards de yuans.
Ventes mondiales de camions lourds en Chine “cinq de suite”, ventes de camions lourds dans le monde “six de suite”, ventes de tracteurs pour 16 années consécutives, leader absolu de l'industrie.
